Continuous Separation Decanter Centrifuge Made in China

• Customization: Available
• After-sales Service: Permanent Technical Support
• Warranty: 1 Year
• Model NO.: LW/ LWS
• Object: Solid-Liquid
• Separation Mode: Phase 2 or Phase 3 Separation
• Operating Type: Solid-Liquid
• Installation: According to The Instructions
• Centrifuge Type: Horizontal Spiral Centrifuge
• Distillation Equipment Type: According to The Model
• Extraction Tower Type: According to The Model
• Pressure: Low Pressure
• Condition: New
• Certification: GMP/CE/ISO/Atex
• Material: SS304/SS316L/Duplex Steel 2205/Ti
• Bearing: F-a-G
• Electronic Component: ABB or Siemens
• Transport Package: Wooden Case
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: China
• Production Capacity: 500sets/Year

Product Description

LW series products are decanter centrifuges that can work continuously and are mainly used for solid-liquid separation,dehydration, fractionation, clarification, and concentration of materials. Based on different phase densities, it separates the solid phases and liquid phases under the action of the centrifugal force generated by the high-speed revolution of the Bowl. The solid phases are conveyed to the conical end of the Bowl through a spiral and then discharged, and the liquid phases are discharged out from the overflow port at the big end of the Bowl. Characterized by simple design, high efficiency and scientific configuration, this product has been widely applied to chemical, pharmaceutical, environmental protection, food, mining, energy and other industries.


Labyrinth seal is adopted for both ends of the Bowl of the standard type of the LW series, which is simple yet efficient. After separation, the solid phases are pushed to the solid discharge outlet through a spiral and then discharged out of the Bowl under the action of the centrifugal force generated from high-speed revolution, and the clarified liquid is discharged out of the overflow port at the big end of the Bowl. Featuring simple operation, stable operation, high efficiency and high automation, and continuous working of 24 hours, this type is widely applied.

This type is mainly used for solid-liquid-liquid separation, which means to separate a solid phase (with its density being the maximum) with two liquid phases of different densities. Based on a certain differential, the Bowl and spiral revolve in the same direction at high speeds, and the materials enter the equipment through the feeding pipe. Under the action of centrifugal force, the solid matters will deposit to form a sediment layer on the Bowl wall, and the two liquid phases will form a light liquid ring and a heavy liquid ring respectively, successively forming a solid layer, light liquid layer and heavy liquid layer inward from the Bowl wall. The spiral works continuously to push the solid matters on the Bowl wall to the conical end of the Bowl and then discharge them out of the equipment through the slag discharging port. The light liquid phase continuously flows out of the overflow port at the big end of the Bowl, while the heavy liquid phase is discharged out through the centripetal pump also at the big end. Thus, continuous separation of three phases is realized.
STRUCTURE AND PRINCIPLE OF AIR-TIGHT SEAL

  The gas-tight seal is a special structure consisting of the mechanical seal and inert gas supply device. It effectively prevents the external air from penetrating into the inner chamber of the centrifuge, and prevents the gas inside the centrifuge from leaking into the external environment.

  The seal device consists of several seal rings and glands, and separates the inner chamber of the centrifuge from the surrounding environment. 

The inert gas is injected into the space among the seal rings, and then penetrates into the inner chamber of the

centrifuge and the external environment through the narrow sealing clearance.

  The pressure of inert gas is higher than those of the inner chamber of the centrifuge and the external atmosphere, therefore, entrance of air into the inner chamber of the centrifuge or escape of the gas out of the inner chamber of the centrifuge can be avoided.

Parameter directory

Model	Diameter (mm)	Max. Speed (rpm)	Separation Factor	Capacity (M3/H)	Power (kw)	Weight (kg)	Overall Size (mm)
LW250×1000	250	5400	4080	2-10	11-15	1000	2600×760×1115
LW300×700	250	4600	3553	2-10	11-15	1120	2335×814×1170
LW300×1000	300	4600	3553	2-10	11-18.5	1380	2635×814×1170
LW350×1000	350	4200	3450	2-18	15-30	1950	2712×872×1244
LW350×1320	350	4200	3450	3-22	22-30	2200	3012×872×1244
LW350×1550	350	4200	3450	2-18	15-30	1950	2800×1380×850
LW430×1320	430	4000	3845	4-28	22-37	2500	3120×940×1320
LW430×1600	430	4000	3845	4-28	22-37	2500	3000×1500×1000
LW430×1800	430	4000	3845	4-28	22-37	2950	3600×940×1320
LW480×1800	480	3650	3580	6-35	37-45	4550	3650×1010×1396
LW480×2000	480	3650	3580	8-40	45-55	5050	3850×1010×1396
LW500×2000	500	3500	3423	8-40	45-55	5800	4150×1380×1558
LW530×2120	530	3500	3630	10-50	45-75	7200	4270×1380×1558
LW530×2200	530	3500	3630	10-50	45-75	7200	3800×2350×1200
LW580×2120	580	3000	29180	12-55	55-75	7800	4290×1450×1638
LW650×2400	650	2800	29180	15-60	75-90	8300	4330×1560×1768

Packing & Delivery
1.Parking:standard wooden box
2.Spare parts :we supply some parts and accessories for free.
3.Electronic module:it is made up of electronic control cabinet.
4.Special tools:we supply a set special tools for free.


 Company Profile

1. Shenzhou Machinery Equipment Co., Ltd. is a professional centrifuge supplier.
2.We have an experienced team and professional design institute with over 30 years of experience in centrifuge machinery.We sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by telephone video conference.
3.Our products are exported to many countries and areas, such as the USA, Korea, India, Indonesia,Thailand, Vietnam,Japan, Denmark,Romania, Bulgaria,Russia,South Africa, and so on.
4.At the same time,our product with best prices and good quality,welcome to Shenzhou!

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.