| Customization: | Available |
|---|---|
| After-sales Service: | Permanent Technical Support |
| Warranty: | 1 Year Warranty for Equipment Spare Parts |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tank Bottom Oily Sludge Treatment Dewatering decanter centrifuge
Scope of application: SOR is mainly used for oil recovery from refinery sludge, aging oil sludge, slope oil sludge etc. It aims to recycle the crude oil and meanwhile minimize the volume of waste to be handled. It's an efficient way to save energy consumption & economy cost.
Decanter centrifuge is one of our company main products. According to the requirement of the material used, we design the horizontal spiral centrifuge with one motor, two motors driving. At the same time, we design two motors separately on both sides of the machine and motors on the same place of the machine. We also develop three column horizontal spiral centrifuge, used in the separation of coal tar oil, water, slag in the industry, in petrochemical in the separation of oil, water, slag.
For different types of raw materials. We will make corresponding adjustments and settings. To ensure that different raw materials can achieve the best separation effect.
Our decanter centrifuge can operate 24/7 with full automation. Provide efficient and powerful assurance for your separation operations.
The advantages of our product:
1. Industrial design
The whole machine set design follows the concept of advanced industrial design, ensuring the whole machine's stability, functionality, and safety. Also effectively absorbs the shear force of dynamic load during operation.
2. Effectively ease resonance during the rotating of bi-rotor
When the centrifuge works, there are no obvious first-order and two-order resonance regions within the designed speed range, meanwhile, the whole vibration intensity of the bearing seat is definitely within 2mm/s-4mm/s.All of this eliminates extra fatigue damage to components and assembly units from high-frequency vibration during operation and sudden vibration when shut down.
3. Thoroughly eliminate the phenomenon of liquid ring stalling
The phenomenon of liquid ring stalling happens during the heavy-duty boot or shutdown process of a complete set machine, especially for LW550 and even larger models, It would make a bounce or wild shake, causing extra impact fatigue damage to main bearings, screw bearings, and inner parts of the rotary bowl. Fortunately, our engineers have solved this problem thoroughly.
4. Unique technique adopts in main component work-blanks
The manufacturing methods of main component work blanks adopt the centrifugal casting technique and overall mold-making forging technique, thoroughly avoiding risks such as intergranular corrosion and relaxation of residual stress release in welding joints.
5. Main bearing electrical components selection
We use the origin bearings of international first-line brands such as S-K-F, F-A-G, etc. Electrical components mainly adopt ABB and Siemens
6. Constant temperature detection
All fashioning components and assembly units are detected in constant temperature conditions to ensure that actual processing quality meets the requirements of designed precision accuracy.
7. Inter-change ability
Whole machine physical design and processing technique adopted in critical position, ensure all assembly units and bowls of the same centrifuge model are interchangeable. It is not only easy to maintain, but also greatly improves the reliability and safety of the equipment.
8. Simply and safely in bearing disassemblement
One layer of oil film is injected into contact surfaces between the bearing and work-piece by high-
pressure, during the disassemblement bearing from the machine.which would fundamentally eliminate friction within different parts. As a result, it would reduce 90% of the pulling force and lower the risk of damage to high-precision parts when disassembling the bearings.
9. Automatic main bearing lubrication system
Thin oil lubrication
* Oil pump offers uninterrupted power to ensure oil works circularly;
* Jet oil lubrication constantly cleans and lubricates bearings and reduces temperature;
* Oil filter system ensures lubricant's cleanliness;
* Oil pressure energy storage system ensure lubrication pump offers an extra oil supply(the pressure is no less than 0.4Mpa) for 5-6 minutes when power fails accidentally;
* Constant temperature system is available.
* Adopt a grease with properties of extreme pressure resistance, oxidation resistance, abrasion resistance, water scour resistance,corrosion-proof, and high-temperature resistance.
* Automatic grease system fills grease on the main bearing at designed hours and quantity.
10. Main bearing BH device (patent design)
There are two spare safe bearings at either end of the main bearing. When the machine works well, they keep a certain clearance from the bearing inside the track to the chief axis. When an unexpected condition occurs, the main bearing getting damaged or circle center deviation causing an amplitude of vibration reaches to designed clearance, safe bearings begin to work as the main bearing Meanwhile, the computer's automatic control system would get feedback of abnormal vibration values on the bearing position immediately then activates emergency shutdown and goes a smooth shut down. This system protects the machine free from damage and ensures production safety.
11. GSRL feeding device (potent design)
The new design of the internal spiral core tube has got the following achieves. Without reducing centrifugal acceleration, shorten the triangle belt's traction time, reduce disorder of swirling flow, and extend separation time. Meanwhile increases the inner working pressure of the centrifuge, and restrains liquid from foaming
More parts show of the decanter centrifuge:
| Model | (Diameter)mm | Rotation speed rpm | Length mm | Separation factor G |
capacity M3/h |
Main motor KW | Vice motor KW |
Dimension: L×D×H |
Machine weight (KG) |
| LW250×1000 | 250 | 3600 | 1000 | 1813 | 1-3 | 7.5/11 | 4/5.5 | 2065×1050×800 | 1100 |
| LW355×1500 | 355 | 3500 | 1200 | 2467 | 3-8 | 11/18.5 | 7.5/11 | 2800×1400×850 | 2000 |
| LW420×1750 | 420 | 3200 | 1750 | 2406 | 4-20 | 30/37 | 11/18.5 | 3120×1580×1050 | 3000 |
| LW450×2000 | 450 | 3000 | 2000 | 2266 | 5─25 | 30/45 | 11/22 | 4320×1050×1180 | 3800 |
| LW500×2100 | 500 | 3000 | 2100 | 2517 | 10-30 | 37/55 | 15/22 | 4500×1110×1200 | 4500 |
| LW550×2200 | 550 | 2800 | 2200 | 2412 | 10-35 | 45/55 | 18.5/30 | 4780×1160×1230 | 5000 |
| LW650×2000 | 650 | 2000 | 2000 | 1454 | 20-50 | 75/90 | 30/37 | 4900×1300×1250 | 6200 |
| LW800×2000 | 800 | 1800 | 2000 | 1450 | 40-100 | 90/110 | 45/55 | 6052×1460×2100 | 10000 |
| LW1000×2350 | 1000 | 1600 | 2350 | 1432 | 50-140 | 110/132 | 55/75 | 6850×1860×2300 | 12800 |
Our services As Follows:
Provide free technical training, guidance and information of accessories.
Our technical staff could instruct our customers on the installation of connector and accessories on site, and deal with technical and quality issues.
Once receive the customer complaints, we will response within 24 hours.
Free maintenance and replacement will be provided if defects result from quality failure of our product.
Our company will provide perfect after-sale services and technical support.
){kind=link}