GF75 Stainless Steel Liquid Solid Separator Tubular Centrifuge Laboratory Centrifugal

• Customization: Available
• After-sales Service: Video Online Support
• Warranty: 1 Year
• Model NO.: GF75
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Extraction Tower Type: Turntable Tower
• Pressure: Low Pressure
• Condition: New
• Name: Industrial Separating Tubular Centrifuge
• Material: 304/316 Stainless Steel
• Voltage: 220V 380V 480V or Customization
• Key Selling Points: Easy to Operate
• Machine Type: Tubular Centrifuge
• Application: Liquid Solid/Liquid Liquid Solid Separator
• Transport Package: Woodencase
• Specification: depend on model
• Trademark: Shenzhou
• Origin: China
• Package Size: 88.00cm * 57.00cm * 131.00cm
• Package Gross Weight: 300.000kg
• Lead Time: 20 days (1 - 1 set) ; To be negotiated ( > 1 set)

Product Description

Product Description

GF75 stainless steel liquid solid separator tubular centrifuge Laboratory centrifugal

It is suitable for the separation of various difficult-to-separate emulsions, especially for liquid-liquid separation where the density difference between the two phases is very small (the specific gravity difference is greater than 0.1), and the liquid-liquid-solid three-phase separation with a small amount of solid phase impurities

Liquid-Liquid-Solid Centrifugal Filters Oil Water Separation Tubular Centrifuge

The centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has t types, one is GQ two phase that can separate solid from the liquid, another is GF series, which  can separate the water, solid from the oil.

 

GF model: Liquid with big density forms the outer liquid circle, while liquid with small density forms the inner circle. Then liquid will flow out of the upper outlet accordingly, and those little solid will be deposited on the drum wall, and be removed by manual after machine stops.

GQ model: Solid particles with big density are gradually deposited on the drum's inner wall, and forms sediment layer, after machine is stopped, is removed by manual. While the clarified liquid flows out through the outlet on the upper of the drum.

Working principle of Tubular Separator
Consist of the machine cover, driving device, drum, liquid catch tray, the liquid inlet and bearing seat, this separator with high running speed, belongs to sedimentation separator. The upper drum is a flexible shaft, while the lower is damping floating bearing. The main shaft is connected by a coupling buffer and a passive wheel. Motor transmit power from the transmission belt and tension wheel to passive wheel, to drive the drum rotate around its own axis with high-speed, and thus form a strong centrifugal force field. All the materials are fed from liquid inlet under the bottom, and flow upward along the drum wall by centrifugal force fluid. During this process, the dense liquid phase forms the outer ring, and the small liquid phase forms the inner ring, which separately flow to respective liquid outlet mounted on the upper drum.
When the thickness of the sediment affect the liquid phase clarification or the capacity of the rated slag weight in the drum, the dregs of the drum wall should be removed manually after the shutdown.

Application:

Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.

Product Paramenters

Model	GF/GQ75	GF/GQ105	GQ/GF125	GQ/GQ150
Diameter(mm)	75	105	125	147
Height (mm)	450	730	730	730
Sedimentation volume(L)	2.67	6	8	10
Max speed(r/min)	20000	16800	15800	14500
Max separation factor	21000	15300	16300	15600
Inlet nozzle diameter (mm)	3/4	4/6/8	4/6/8	4/6/8/10
Material inlet pressure (Mpa)	≥0.05
Capacity (Water capacity)L	670	1600	2200	3200
Motor model	3 phase two pole motor	3 phase two pole motor		3 phase two pole motor
Motor power (kw)	1.5	2.2	3	3
Machine dimension (mm)	500*700*1300	600*1000*1600	600*1000*1600	600*1000*1600
Machine weight (kg)	260	490	510	550

Main Characteristics
1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional
tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the
machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials
which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil,
fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.
PRODUCT PACKAGING

1.We have professional person on line to advise you the most suitable type of machie  according to your requirement.

2.Provide you comprehensive.easy-understanding and detail information and technical data about the machie you interested;solve your confusions or questions about the machine 

3.Arrange the schedule if you pay a visit to our factory.

   Our main products series

 

1. Program-controlled automatic filter press

 

2. Membrane filter press

 

3. Hydraulic compress filter press

 

4. Mechanical compress filter press

 

5. Jack filter press

 

6. Cast iron plate and frame/chamber filter press

 

7. Stainless steel plate and frame filter press

 

8. Round plate filter press

 

9. Cotton cake filter press

 

10. Cardboard filter press

 

11. DY belt filter press

 

12. DYX high pressure belt filter press

 

13. DNY rotary drum thickning/dehydrating belt filter press

 

14. Triple-belt thickning and dehydrating filter press

 

15. SS type three-foot upper discharge centrifuge

 

16. SD type three-foot and filter bag hoist discharge centrifuge

 

17. PD type filter bag hoist discharge centrifuge

 

18. Centrifuge of up discharge, three foot, clean series SSB, SB

 

19. SX type manual top discharge centrifuge

 

20. PS type manual top discharge centrifuge

 

21. SGZ type automatic scraper bottom discharge centrifuge

 

22. PGZ type scarper bottom discharge centrifuge

 

23. LW series decanter centrifuge

 

24. Tubular centrifuge

 

25. Multi-layer stainless steel frame filter

 

26. Bag filter

 

27. Diatomite filter

 

28. Filter late

 

29. Filter cloth

 

30. Vacuum disc filter

Company Profile

Liaoyang Shenzhou Machinery Equipment Co., Ltd.belongs to SHENZHOU international Group. We are the professional manufacturer of Centrifuge & Separator, Liquid Filling Machine and packing machine. With many years producing experience, our factory have become leading manufacturer with professional technical team and Independent after-sale department. Our international trade department can supply the whole project service. With many years development, we have known which factories have strong product with competitive price and we have built long-term and stable cooperation relationship with them. Our main area are the food and pharmacy project. Our successful project are coconut oil production line, liquid filling production line, packing production line and the tablet press production line, soft gelatin production line and so on. Our aim is providing you efficiently solution and superior after-service. We sincerely hope YOU are our next customers!

Exported country:
At present, our products have been exported to South Korea, India, Denmark, Russia, Georgia, Jordan, Bangladeshi, Tailand, Ethiopia, Finland, the United States, Canada, Australia, Spain, Japan, Colombia, Romania and so on more than 30 countries

FAQ
1. What certificates do you have?
We can provide CE, ISO 9001, etc

2. What is the warranty period of the equipment?
Normally 1 year warranty.

3. Can we visit your factory?
Of course, we sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by
telephone video conference.

4. What's payment you accept?
A4: T/T, Western Union, L/C, Ali Pay, etc

5. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
Our service

The technical and after-sale services are listed as follows:

1. Provide free technical training, guidance and information of accessories.

2. Our technical staff could instruct our customers on the installation of connector and accessories , and deal with technical and quality issues.

3. Our products with 1 years' warranty and life maintenance.

4. Once receive the customer complaints, we will response within 24 hours.

5. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.

6. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.

7. Our company will provide perfect after-sale services and technical support. Hot line: 86-18941925296

Contact person: Cathy
Once receive the calling of complaints, we will respond to it within 12 hours at working time and provide solution within 48 hours. If necessary, our company will send technical staff there and provide on-site solution.