Customization: | Available |
---|---|
Application: | Solid-Liquid Separation |
Certification: | CE, GMP |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. The centrifuge rotates at a high speed to reach a suitable working speed (the speed can be adjusted via the control panel), and the mixed suspension is continuously fed from the bottom, and the suspension are layered under the action of centrifugal force;
2. The density of the liquid in the suspension is relatively small, and it spirally rises gradually from bottom to top and then continuously discharges from the clear liquid outlet on the upper part of the rotor;
3.The solid phase is relatively heavier, and it will settle inside the bowl. After the solid is collected, turn off the centrifuge, and manually remove the rotor for slag cleaning;
4. After cleaning the slag, you need to reset the rotor installation, and then start the next separation process.
1.The centrifuge rotates at a high speed to reach a suitable working speed (the speed can be adjusted control panel), and the mixed suspension is continuously fed from the bottom, and the suspension are layered under the action of centrifugal force;
2.The two liquids in the suspension have a difference in density and are incompatible with each other. The liquid phase spirally rises gradually from bottom to top to the upper part of the rotor. The liquid phase with a smaller density is discharged from the light liquid outlet, and the liquid phase with a larger density is discharged from the heavy liquid outlet;
3.The solid phase density is the largest, and it will settle inside the bowl. After the solids are collected, turn off the centrifuge, and manually remove the rotor for slag cleaning;
4. After cleaning the slag, need to re-install the rotor, and then start the next separation process.
FEATURES OF HIGH SPEED TUBULAR CENTRIFUGE
Peristaltic pump is used to transfer liquid by peristaltic rubber hose caused by rotating roller. The conveyed liquid only flows in the rubber hose, does not contact with other parts of the pump, and has no cleaning dead angle, so as to avoid possible pollution. The material of the hose is strictly selected and made of non-toxic silicone rubber or polychloroene material, which meets the hygienic standards in biochemical and medical fields. This kind of pump is with novel design, simple structure, step-less speed change to adjust the flow, suitable for working in humid environment, easy to operate, and easy to clean and disinfect.
Peristaltic pump is widely used in hospitals, biochemistry and other industries to pump blood and other liquids. It can also be used for transporting liquids in other industries. It is suitable to be used as a feed pump for high-speed tubular centrifuges.
Model | RB-10 |
---|---|
Speed (RPM) | 200~700 |
Flow (L/min) | 4~10 |
Pressure (kg) | 1.5 |
Motor Power (w) | 220 |
Hose inner/outer Dia. (mm) | Φ10x16.5 |
Weight (kg) | 12 |
Dimension (mm) | 460x200x210 |
The above specification and parameters for reference only. |
Type |
45 | 75 | 105 | 125 | 150 |
Diameter (mm) | 45 | 75 | 105 | 125 | 142 |
Bowl Speed (r/min) | 28800 | 19000 | 16300 | 15000 | 13400 |
Bowl Volume (L) | 0.2 | 2.2 | 6 | 8 | 10 |
Separating Factors (ω2.r/g) | 19000 | 15700 | 15620 | 15750 | 15700 |
Though output Capacity (L/h) | 20 | 600 | 1200 | 1500 | 2500 |
Motor Power (kw) | 0.75 | 1.5 | 2.2 | 3.0 | 3.0 |
Weight (kg) | 80 | 300 | 570 | 610 | 665 |
Dimension(mm) L×W×H | 300*450*450 | 760×450×1120 | 840×500×1600 | 900×550×1600 | 1020×600×1600 |