Piling Mud Decanter Centrifuge

• After-sales Service: Permanent Technical Support
• Warranty: 1 Year Warranty for Equipment Spare Parts
• Type: Centrifuge
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LW
• Object: Solid Liquid or Liquid-Liquid or Liquid-Liquid
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Decanter Centrifuge
• Pressure: Medium Pressure
• Condition: New
• Material: SS304 or SS316 L
• Electronic Component: ABB or Siemens
• Certification: GMP/CE/ISO
• Technical Characteristics: Drum Casting Integrated
• Transport Package: Wooden Cases
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: Zhejiang
• HS Code: 8421192000
• Production Capacity: 500sets
• Package Size: 2100.00cm * 1200.00cm * 1800.00cm
• Package Gross Weight: 1850.000kg

Product Description

Decanter Centrifuge Applies in Pilling Activities

Although the pollution of construction piling mud is not as great as that of other industrial the degree of dehydration of sludge is not as high as that of domestic sludge. However, its large output and many sources also cause problems in engineering construction. In the construction of cast-in-place piles, there are mud retaining pile bored piles, rotary bored cast-in-place piles, punched cast-in-place piles, long spiral bored piles, dry work piles and sinking piles..

The waste mud contains a large amount of cohesive soil, sand, gravel soil, weathered rock, minerals and cuttings, etc. It has a large consistency and cannot be directly discharged, and it is difficult to settle naturally. The use area of the construction site itself is limited. If it is not treated in time, it will not only affect the construction, but also cause environmental pollution or water pollution.

There are many problems in the existing construction piling mud dewatering separator: first, high cost, low efficiency, and tight construction; second, the construction site is in a bad environment, the muddy water overflows, making it difficult to intervene; the latter is bound by geographical conditions, etc. Significantly increased transportation costs. The engineering team often suffers huge fines due to the blockage of mud water leaking into the sewer. In addition, tank trucks often pollute the city's environment due to muddy water spilling over the urban trunk roads

The special decanter centrifuge for piling mud developed by SHENZHOU Separation Technology can efficiently purify and separate the piling mud. The purpose of the work is solid-liquid separation of , improve the porosity of the pile foundation and reduce the bentonite consumption. It can effectively control the slurry quality of the construction mud, and can realize the environmental protection transportation and slurry discharge of the mud waste residue, and meet the site requirements of environmental protection construction.

 

Two phase centrifuge specification

Model	Technical parameter					motor power		outline dimension(mm)	Machine weight (KG)
	(Diameter)mm	Rotation speed rpm	Length mm	Separation factor G	capacity M3/h	Main motor KW	Vice motor KW	Dimension: L×D×H
LW250×1000	250	3600	1000	1813	1-3	7.5/11	4/5.5	2065×1050×800	1100
LW360×1200	360	3500	1200	2467	3-8	11/18.5	7.5/11	2600×1500×850	1900
LW360×1500	360	3500	1500	2062	3-8	11/18.5	7.5/11	2800×1400×850	2000
LW420×1750	420	3200	1750	2406	4-20	30/37	11/18.5	3120×1580×1050	3000
LW450×1600	450	3200	1600	2578	5-25	30/45	11/22	3780×1050×1180	3500
LW450×1800	450	3200	1800	2578	5-25	30/45	11/22	3985×1050×1180	3600
LW450×2000	450	3000	2000	2266	5─25	30/45	11/22	4320×1050×1180	3800
LW500×1800	500	3000	1800	2517	10-30	37/55	15/22	4200×1110×1200	4300
LW500×2100	500	3000	2100	2517	10-30	37/55	15/22	4500×1110×1200	4500
LW550×1800	550	3000	1800	2769	10-35	45/55	18.5/22	4380×1160×1230	4800
LW550×2200	550	2800	2200	2412	10-35	45/55	18.5/30	4780×1160×1230	5000
LW650×1750	650	2000	1750	1454	20-50	75/90	30/37	4576×1300×1250	6000
LW650×2000	650	2000	2000	1454	20-50	75/90	30/37	4900×1300×1250	6200
LW800×2000	800	1800	2000	1450	40-100	90/110	45/55	6052×1460×2100	10000
LW1000×2350	1000	1600	2350	1432	50-140	110/132	55/75	6850×1860×2300	12800

More parts show of the decanter centrifuge:

Our services  As Follows:

Provide free technical training, guidance and information of accessories.

Our technical staff could instruct our customers on the installation of connector and accessories on site, and deal with technical and quality issues.

Once receive the customer complaints, we will response within 24 hours.

Free maintenance and replacement will be provided if defects result from quality failure of our product.

Our company will provide perfect after-sale services and technical support. 


 

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.