Automatic Slag Discharge Disc Centrifuge Solid Liquid Separation Disc Centrifuge

• Customization: Available
• Type: Centrifuge
• Object: Milk Separation
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Motor: ABB
• Inverter: ABB
• Touch Screen: Siemens
• Bearing: Imported
• Transport Package: Wooden Case
• Specification: material: stainless steel
• Trademark: Shenzhou
• Origin: China
• Production Capacity: 500sets/Year

Product Description

 

The disc stack separator is also called disc separator. It is a device that rapidly separates solid and liquid through high-speed centrifugal force. The alias is also called disc centrifuge or conical plate centrifuge, which belongs to a type of vertical centrifuge. The disc separator is driven by a motor and rotates at high speed. In the bowl of the disc separator, there is a set of disc-shaped parts nested with each other-commonly known as discs. There is a small gap among the discs, which are used for centrifugal sedimentation of materials. The suspension (or emulsion) to be processed enters the bowl of the disc separator through the feed pipe. When the suspension (or emulsion) flows through the gap between the discs, the solid particles (or droplets) settle on the disc under the action of the centrifuge to form a sediment (or liquid layer). The sludge slides along the surface of the disc to separate from the disc and accumulates in the inner bowl where the diameter is large, and the separated liquid is discharged from the bowl through the liquid outlet. For the 3-phase disc separator, there are two centripetal pumps inside, which can discharge the two immiscible liquid phases having difference densities. The role of the discs in the disc separator is to shorten the settling distance of solid particles (or droplets) and expand the effective settling area of the bowl so as to greatly improve the production capacity of the disc separator. The solids accumulated in the bowl can be discharged through the automatic slag discharge mechanism without stopping the machine. By using the disc separator, solid-liquid-liquid 3-phase separation or solid-liquid separation is realized.

• Mineral, Biodiesel Oil Disc Separator Series
• Beer, Beverage Disc Separator Series
• Dairy Disc Separator Series
• Latex Disc Separator Series
• Starch Disc Separator Series
• Vegetable Oil, Animal Oil Disc Separator Series
• Yeast Disc Separator Series
• Marine Disc Separator Series
• Biological, Pharmaceutical Disc Separator Series
• Chemical Disc Separator Series

 

The separated material enters into the heart of the machine, that is, the inside of the bowl. Under the action of strong centrifugal force, the material passes through a set of disc bundle separation intervals. With the neutral holes of the disc as the interface, the liquid with larger specific gravity moves along the disc wall towards the outside the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase liquid flows upward to the centripetal pump; the lighter liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centrifugal pump. The light and heavy liquid phases are discharged by the lower centrifugal pump and the upper centripetal pump respectively; the heavy slag is regularly discharged; continuous production is implemented.

 

The 2 phase disc stack separator is used to separate the fine particles from the liquid and discharge clarified liquid. Compared with decanter centrifuge, the G force of 2 phase disc stack separator is much higher than decanter centrifuge. The disc stack separator G force is up 12000g. Generally, the G force of the decanter centrifuge is about 3000G. The high speed and G force makes the disc stack separator to produce high clarified liquid. However, the materials separated by disc separator should not have high solid content or big particles. Usually the particles content should be less than 3%, it's better to be 1%. Therefore, in some application, pre-treatment will be carried out by decanter centrifuge or other separation equipment, and then clarification and separation will be carried out in the 2 phase disc stack separator. The 2 phase disc stack separator is widely used in vegetable oil clarification, biological and chemical pharmaceutical industry, dairy and beverage industry, biofuel and marine oil clarification, etc.

 

Strategy: Being professional and devoted to build up core competitiveness
Market: European quality, Chinese price

 

Mangement: practical, standard and successive improvement

 

Service: honest, responsable and timely

 

Talent: merits, cooperation and caring

 

Technology: technology leadership

 

 

Biopharmaceutical as a high-technology has opened up a broad foreground for the development of medical industry and pharmaceutical industry and greatly improved people's lives.

 

The separation quality plays an important role in biopharmaceutical process.

 

 

Model	Treatment capacity (M3/H)	Inlet pressure (Mpa)	Outlet pressure (Mpa)	Motor power (Kw)	Weight(Kg)	Outline dimension (mm)
DHC214	5-15	0.2	<=0.4	22	2200	1980*1550*2020
DHC216	15-25	0.2	<=0.4	37	3300	2100*1900*2400
DHC620	20-35	0.2	<=0.4	55	3600	2360*1690*2500

High speed, stable operation, fully closed of inlet and outlet system, low noise, good separation, high oil rate, fully automatic control , easy to operate.

 

SHENZHOU  workers also research various disc separator to meet kinds of separation process.

1. Months guarantee period from machine arriving date.

2. Sufficient spare parts in stock are available .

3. Technicians are availabled for overseas service.

4. 24 hours technical consultation .

5. The customer could get trained by our experienced tecnician.