Solid Liquid Mixture Decanter Centrifuge

• Customization: Available
• Warranty: 12monthes
• Type: Centrifuge
• Model NO.: LW
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Centrifuge Type: Horizontal Spiral Centrifuge
• Pressure: Low Pressure
• Condition: New
• Material: SS304 or SS316 L
• Machine Name: Lw Decanter Centrifuge for Sludge Dewatering
• Motor: ABB
• Inverter: ABB
• Transport Package: Wooden Cases
• Specification: 2065*1050*800
• Trademark: Shenzhou
• Origin: Zhejiang
• HS Code: 8421192000
• Production Capacity: 500sets
• Package Size: 105.00cm * 80.00cm * 160.00cm
• Package Gross Weight: 1050.000kg

Product Description

The centrifuge is driven by two motors at the same time. One is the main motor and the other is the auxiliary motor. The main motor drives the drum and the auxiliary motor drives the propeller.
After the machine to start the desilter processed under the mud by liquid slurry pump, screw pump, or small mouth to drum, the mono pump mud into the propeller inside tube wall first, because there are a number of holes on the wall, in the process of high-speed mud through holes into the drum, the drum and propeller under two different motor drive power will produce 35: 1. In this environment, a centrifugal force will be generated between the inner wall of the drum and the propeller, and the solid particles contained in the slurry suspension will rapidly separate due to the different density and particle size.
The solid particles will move along the mud barrier on the propeller to the small opening and be discharged from the round hole on the cone drum, and the separated mud will move along the mud barrier on the propeller to the large mouth of the rotary drum and be discharged through the oval hole straight ahead.

Generally, the speed difference between the high speed and low speed of the variable-frequency centrifuge is not more than 50%. If the speed difference between 1600-3200/3300rpm is greater than 50%, it is necessary to convert the general motor into a variable-speed motor.

Features:
1. Medium speed processing capacity 5-15μm, high speed 2-5μm.
2. The edge of the spiral propeller is coated with tungsten carbide wear resistant layer, and polished smooth to increase the wear resistance and service life of the propeller.
3. A longer drum can extend the residence time of drilling fluid in the drum, resulting in drier solid particles and finer separation points.
4. Replaceable carbide sleeve shall be installed at the sand discharge port of cone cylinder.
5. The overflow mouth of the big end of the rotary drum adopts adjustable weir plate, which can adjust the dryness of the sand outlet particles according to the treatment of mud.
6. Before assembly, the rotating parts (propeller, drum, etc.) should be tested for dynamic balance. After assembly, the operation test should be done on the test bench for 8 hours to observe the operation of the whole machine.
7. Electrical overcurrent protection

Decanter centrifuge is a kind of sedimentation equipment with horizontal screw discharged and continuous operation. It is mainly composed of a feed port, a decanter bowl, a decanter screw conveyor, a solid phase discharged outlet, and a liquid phase outlet.

First, the raw material is pumped into the decanter centrifuge through the feed port, and then into a horizontal bowl (also called a rotating drum) composed of a cylindrical and a conical part. Then, the bowl and the screw (the screw conveyor of decanter centrifuge) rotate at a high speed in the same direction at a certain differential speed. Due to the higher density, the solids contained in the product settled on the inner wall of the bowl under the action of centrifugal force. The conveying screw continuously pushes the solid phase deposited on the bowl to the cone end of the bowl, then solids is discharged out of the machine. The clarified lighter liquid phase forms an inner liquid ring, which continuously overflows the bowl from the overflow port at the large end of the bowl, and is discharged out of the machine through the liquid discharge port. Eventually to achieve the purpose of separating the solid phase from one or two liquid phases.

Decanter centrifuge is a very important and necessary industrial equipment. Therefore, it is very important and necessary to understand how the centrifuge works.
One of the commonly used industrial machines for separating solids from the liquid is a decanter centrifuge through the high-speed rotation. It has main components such as bowl and screw conveyor.
 

As you can see from your house washing machine, it uses centrifugal force to dewater the clothes effectively. Also, you can feel a bit unbalanced when you are driving and taking turns. It is also due to centrifugal force.
Centrifugal force causes an object to move in a circular or curved path to move away from the center of this circle or arc path.
 

Imaging you can a pond filled with muddy sand and water, the sand will eventually accumulated at the bottom of the pond in time.
This is due to sand is heavier than water and by the force of the gravity there will finally be two distinct layers in this pond: water layer in the top and sand layer in the bottom.

To accelerate the decanter time, centrifugal force has brought in to generate as high as 4000 times of the gravity force, Thus reducing the separation time from hours to seconds.
 

Decanter centrifuge has both horizontal and vertical types, in this article we only discuss the most used one: horizontal decanter centrifuge.

* 1. Bowl - a rotation assembly where the feeding is processed here. Normally it has a horizontal section and a conical section, the angle of the conical section, also known as beach angle will be adjusted due to different feeding and process requirement.
* 2. Screw conveyor - a helix with spiral flights, its speed is controlled by gearbox and drives.
* 3. Gearbox - mechanism to generate a differential speed. this can be cyclo or planetary gearbox.
* 4. Drive - this can be hydraulical drive or electrical motor.
* 5. Weir plates - adjusting plates for control the performance of the separation.
* 6. Control panels - centrifuge is installed with many electrical sensors, so the control panel can monitor the running operation in terms of feeding capacity, temperature and vibration alarm as well as adjust the parameters such as bowl speed, and differential speed. Also it adapts the PLC programming, where certain level of automation can be achieved, such as auto stop when alarming occurs, increase or decrease of the torque force accordingly.
* 7. Cover, stand and Pipes: some cleaning pipe allowing CIP function while operation.
When in operation, the feed is put into the main chamber of the bowl to achieve separation in the following steps:
* 1. Feeding slurry is sprayed into the main chamber of the bowl.
* 2. High speed rotation of the bowl will generate centrifugal force, this will force the heavier solids move to the wall of the bowl (as the sand decants towards the bottom of the muddy water pond). While the lighter liquid will move to the center layer of the bowl.
* 3. Screw conveyor rotates at a different speed from the bowl by using gearbox and motor drives. This will push the solids to one end of the decanter. At this end, the conical section bowl forms a "beach", where the solids can be pushed out and discharged. And the liquid is discharged n by overflowing to the exit of the other end of the bowl.
* 4. The outcome performance of the separation, in terms of dryness of the solid and purification of liquid, can be adjusted by weir plates in the bowl end.
Additionally, three phase, liquid /liquid/solid separation can be achieved, this is implemented by letting the light liquid phase to be overflowed from the heavier liquid phase. Moreover solid/solid/liquid separation can also be achieved for the decanter centrifuge.
Through this complete basic guide that introduces the working principle of a decanter centrifuge, I believe you have a very good idea of how the centrifuge works.
Yes, the decanter centrifuge uses the centrifugal force generated by the high-speed rotation, and then realizes the pollution-free sedimentation and separation according to the weight difference between different solid and liquid substances.
The decanter centrifuge of SZ Separation is also developed using this principle. It can not only realize the two-phase separation of solid and liquid, but also realize the liquid/liquid/solid three-phase separation.

Pipeline sludge is also known as "passage sludge". In the drainage pipe system, sludge formed by sedimentation of some substances in the sewage due to gravity sedimentation, adhesion, and interception. According to the type of drainage pipe, it can be divided into confluent sewage pipe sludge, diversion sewage pipe sludge and diversion rainwater pipe sludge. The nature of the sewage pipe sludge is obviously different from that of the sewage plant sludge. In the treatment process, sludge dewatering is the most important part. After dewatering, the sludge treatment methods include dewatering, landfill and composting.

e:

• Water Content of Sludge:65~81%
• SS content of liquid:≤0.05~0.2%
• SS recovery rate:≥85~98%
• Chemical Consumption per ton DS:1~5kg/TDS

Model	Technical parameter					motor power		outline dimension(mm)	Machine weight (KG)
	(Diameter)mm	Rotation speed rpm	Length mm	Separation factor G	capacity M3/h	Main motor KW	Vice motor KW	Dimension: L×D×H
LW250×1000	250	3600	1000	1813	1-3	7.5/11	4/5.5	2065×1050×800	1100
LW360×1200	360	3500	1200	2467	3-8	11/18.5	7.5/11	2600×1500×850	1900
LW360×1500	360	3500	1500	2062	3-8	11/18.5	7.5/11	2800×1400×850	2000
LW420×1750	420	3200	1750	2406	4-20	30/37	11/18.5	3120×1580×1050	3000
LW450×1600	450	3200	1600	2578	5-25	30/45	11/22	3780×1050×1180	3500
LW450×1800	450	3200	1800	2578	5-25	30/45	11/22	3985×1050×1180	3600
LW450×2000	450	3000	2000	2266	5─25	30/45	11/22	4320×1050×1180	3800
LW500×1800	500	3000	1800	2517	10-30	37/55	15/22	4200×1110×1200	4300
LW500×2100	500	3000	2100	2517	10-30	37/55	15/22	4500×1110×1200	4500
LW550×1800	550	3000	1800	2769	10-35	45/55	18.5/22	4380×1160×1230	4800
LW550×2200	550	2800	2200	2412	10-35	45/55	18.5/30	4780×1160×1230	5000
LW650×1750	650	2000	1750	1454	20-50	75/90	30/37	4576×1300×1250	6000
LW650×2000	650	2000	2000	1454	20-50	75/90	30/37	4900×1300×1250	6200
LW800×2000	800	1800	2000	1450	40-100	90/110	45/55	6052×1460×2100	10000
LW1000×2350	1000	1600	2350	1432	50-140	110/132	55/75	6850×1860×2300	12800

More parts show of the decanter centrifuge: