Industrial Disc Stack Centrifuge Liquid Liquid Solid 2/3 Phase Separator Machine

• Customization: Available
• After-sales Service: Life Long
• Warranty: 1year
• Model NO.: RSLD
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Motor: ABB
• Touch Screen: Siemens
• Inverter: ABB
• Material: Stainless Steel
• Transport Package: Wooden Case
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 200

Product Description

                                                      2 Phase Disc Stack Separator

The 2 phase disc stack separator is used to separate the fine particles from the liquid and discharge clarified liquid. Compared with decanter centrifuge, the G force of 2 phase disc stack separator is much higher than decanter centrifuge. The disc stack separator G force is up 12000g. Generally, the G force of the decanter centrifuge is about 3000G. The high speed and G force makes the disc stack separator to produce high clarified liquid. However, the materials separated by disc separator should not have high solid content or big particles. Usually the particles content should be less than 3%, it's better to be 1%. Therefore, in some application, pre-treatment will be carried out by decanter centrifuge or other separation equipment, and then clarification and separation will be carried out in the 2 phase disc stack separator. The 2 phase disc stack separator is widely used in vegetable oil clarification, biological and chemical pharmaceutical industry, dairy and beverage industry, biofuel and marine oil clarification, etc.

2 PHASE DISC STACK SEPARATOR WORKING PRINCIPLE

 

The material to be clarified enters the bowl through a feed pipe. In the distribution cabinet of the disc separator, the material is smoothly accelerated until it is synchronized with the speed of the rotary bowl. The disc stack in the rotating cylinder divides the material into many thin layers, forming a large area of clarification area. The high-speed centrifugal force makes the solid slag separated from the liquid in the disc stack deposit into the solid slag collection cavity at the edge of the bowl. The self-discharging 2 phase disc separator can be adjusted according to the material.

2 PHASE DISC STACK SEPARATOR TECHNICAL PARAMETER

Model	RSLD-40	RSLD-90	RSLD-125	RSLD-225
Type	Solid-Liquid Separation(Liquid Clarification)
Bowl Diameter	440mm	580mm	620mm	800mm
Sliding Piston	380mm	500mm	550mm	700mm
Max Capacity	1-2 m3/h	5-10m3/h	10-15 m3/h	20-25m3/h
Max Speed	7100RPM	6150RPM	6000RPM	4500RPM
Max G Force	12409G	12273G	12488G	9063G
Motor Power	11KW	18.5KW	30KW	45KW
Feeding Pressure	0-0.1Mpa
Starting Time	10-15Minutes
Feeding Material	Solids content less 3%

3 Phase Disc Stack Separator

3 phase disc stack separator is a high-speed, stable, sealed, efficient, and automatic slag discharge 3 phase separation equipment. It is widely used for liquid, liquid, solid 3-phase separation or liquid-liquid separation. The 2-phase solid-liquid separation disc separator has only one liquid discharge port and one slag discharge port, while the 3-phase disc separator has two liquid discharge ports and one slag discharge port, which can separate two liquids with different specific gravity at the same time. It can also discharge solid phase materials. Compared with the 3 phase decanter centrifuge, the 3 phase disc separator has larger rotation speed and G force. The 3 phase decanter centrifuge usually has a separation factor of about 3000G, while the 3 phase disc stack separator G force is up to 12000G. Therefore, the 3 phase disc separator can more thoroughly separate liquids with different specific gravity and the liquid phase discharged is more clarified. However, compared to 3 phase decanter centrifuges, 3 phase disc separator is more used to separate materials containing fine particles, with less solids content. So before entering the 3 phase disc separator, the material can separated by the decanter centrifuge for pre-stage separation to reduce the solids content and remove big particles.
The separated material enters into the heart of the machine, that is, the inside of the bowl. Under the action of strong centrifugal force, the material passes through a set of disc bundle separation intervals. With the neutral holes of the disc as the interface, the liquid with larger specific gravity moves along the disc wall towards the outside the neutral hole, where heavy slag accumulates in the sediment area, and the heavy phase liquid flows upward to the centripetal pump; the lighter liquid with a smaller specific gravity moves along the disc wall into the neutral hole and converges to the lower centrifugal pump. The light and heavy liquid phases are discharged by the lower centrifugal pump and the upper centripetal pump respectively; the heavy slag is regularly discharged; continuous production is implemented.

3 PHASE DISC SEPARATOR TECHNICAL PARAMETER

Model	RSSD-40	RSSD-90	RSSD-125	RSSD-225
Type	Liquid-Liquid Separation (or Liquid-Liquid-Solid)
Bowl Dia	440mm	580mm	620mm	800mm
Sliding Piston	380mm	500mm	550mm	700mm
Theoretical Capacity	1-2 m3/h	5-10m3/h	10-15 m3/h	20-25m3/h
Max Speed	7100RPM	6150RPM	6000RPM	4500RPM
Max G Force	12409G	12273G	12488G	9063G
Motor Power	11KW	18.5KW	30KW	45KW
Feeding Pressure	0-0.1Mpa
Starting Time	10-15Minutes
Feeding Material	Solids content less 3%

3 PHASE DISC SEPARATOR FEATURES

All parts contacting with the material are made of high-grade stainless steel, which effectively reduces the chemical interaction between the separated material and the surface of the contacting part. The separated light and heavy phase liquid materials are output by two centripetal pumps of different sizes. This machine adopts upper feeding, which has lower inlet pressure on the material. Hydrodynamic coupling and a pair of helical gears or belt drive are used in the power transmission. The speed increase is stable and overload protection can be performed.

The slag discharge action of the sliding piston is automatically controlled by a PLC fully automatic control cabinet specially designed with safety protection devices. It is high level automation, strong adaptability for process adjustment, and convenient adjustment, low noise and good separation effect. Professionally designed centripetal pump system is with stable output pressure, large adjustment range and easy operation.

3 PHASE DISC SEPARATOR APPLICATION

• Animal and vegetable oil separation:Vegetable oils mainly include: rapeseed oil, cottonseed oil, corn oil, palm oil, soybean oil, peanut oil, sunflower oil, rice bran oil, sesame oil, and safflower oil. Animal oils mainly include: fish oil, and fat purification of various animals.
• Beverage industry: dairy purification, separation of milk and cream, fruit juice (orange juice, apple juice, etc.), vegetable juice, tea drinks, coffee, beer and other industries.
• Pharmaceutical industry: separation of extracts (such as penicillin, vitamins, E. coli, antibiotics, hormones, etc.), concentration of microorganisms, concentration and clarification of fermentation broth, and separation of blood.
• Plant extraction and separation: pigments, peppers, tea leaves, loquat leaves, honeysuckle, ginkgo biloba, salvia, amygdalin, traditional Chinese medicine extraction, etc.
• Chemical industry separation: lubricant additives, viscose, PVC, cellulose and derivatives, ink and dye, phosphoric acid, herbicide, latex (synthesis), boiler ash, catalyst, etc.
• Fuel and marine oil industry: separation of methyl ester, glycerin, catalyst, soap removal, methanol, water washing methyl ester, extraction of fatty acids, glycerin desalination in the field of bio oil. Recovery and clarification of marine oil, and removal of moisture and mechanical impurities in fuel oil (light diesel, heavy diesel, fuel oil) and lubricating oil of marine diesel engine equipment.
• Environmental protection industry: food waste treatment, water treatment industry
•