High Speed Tubular Centrifuge for Liquid Liquid Solid Separation

• Customization: Available
• After-sales Service: Video Online Support
• Warranty: 1 Year
• Model NO.: GF/GQ
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Extraction Tower Type: Turntable Tower
• Condition: New
• Material: Stainless Steel
• Voltage: 220V 380V 480V or Customization
• Key Selling Points: Easy to Operate
• Operation: Batch
• Machine Type: Vertical Separator
• Transport Package: Depending on The Type
• Specification: 200-600kg
• Trademark: Shenzhou
• Origin: China
• Package Size: 600.00cm * 800.00cm * 1150.00cm
• Package Gross Weight: 500.000kg

Product Description

Product Description

High speed Tubular Centrifuge for Liquid Liquid Solid Separation

GF SERIES: used for separating various emulsions, especially for liquid- liquid separation with a small proportion of two-phase and liquid-liquid- solid separation with a small amount of impurities, such as transformer oil, turbine oil,lubricating oil, fuel oil, dye, grease, all kinds of powder materials, all kinds of oral liquid, all kinds of liquid, 920 separation; Separation of plasma biological and extraction of plasma from animal blood; Edible oil, CAI pan soak liquid, tea Phenol, soybean concentrated phospholipid refining, oil and water separation and sewagetreatment.

GQ SERIES: it is used for separating all kinds of suspension which is difficult to be separated. It is especially suitable for
solid-liquid separation with small concentration, high viscosity, fine solid phase particles and small difference in solid-liquid weight. For example, all kinds of liquid , grapes clarification of sugarwash bitide, malic acid, oral liquid and beancurd root; Coal tar, graphite slag removal; Extraction of various proteins, algal bands and pectin; Refining molasses; Blood separation, vaccine mycelium, each settlement of seed glucose; paint, dye, various resins, rubber solution purification.

Working principle of Tubular Separator
Consist of the machine cover, driving device, drum, liquid catch tray, the liquid inlet and bearing seat, this separator with high running speed, belongs to sedimentation separator. The upper drum is a flexible shaft, while the lower is damping floating bearing. The main shaft is connected by a coupling buffer and a passive wheel. Motor transmit power from the transmission belt and tension wheel to passive wheel, to drive the drum rotate around its own axis with high-speed, and thus form a strong centrifugal force field. All the materials are fed from liquid inlet under the bottom, and flow upward along the drum wall by centrifugal force fluid. During this process, the dense liquid phase forms the outer ring, and the small liquid phase forms the inner ring, which separately flow to respective liquid outlet mounted on the upper drum.
When the thickness of the sediment affect the liquid phase clarification or the capacity of the rated slag weight in the drum, the dregs of the drum wall should be removed manually after the shutdown.
Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.

The separation bowl inside
The bowl is the main part of tubular centrifuge, full stainless steel 304 , stainless steel 316L is available. The separated solid content will be located inside the bowl which will be discharged manually after separation is done.

We can provide standard normal motor or explosion-proof motor. Normal power supply is 380V, 50Hz, 3-phase,  Different voltage in different country can be customized. Such as 220V or 415V, 50Hz or 60Hz, 1-phase or 2-phase.

The Feeding inlet

The feeding inlet of raw liquid is at the bottom of machine. All the contact part with raw liquid is stainless steel 304, also stainless steel 316 can be required. The user can use pump or high-low position feeding tank to feed.

The liquid outlet

GF type tubular centrifuge is three-phase solid-liquid-liquid separator. There are two liquid outlets. The user need two pipes connect with two outlets. The upper outlet is for light liquid, and the lower is for heavy liquid.

 

 

Product Paramenters

Model	GF/Q45	GF/Q75	GF/Q105	GQY125	GQ150
Bowl diameter	45 mm	75 mm	105 mm	125 mm	142mm
Effective height in bowl	280 mm	430 mm	730 mm	735 mm	700 mm
Settling volume in bowl	0.45 L	2 L	5.5 L	7.4 L	10 L
Bowl speed	0-28000 r/min	16770 r/min	16000 r/min	15000 r/min	14000 r/min
Max separation factors	0-19800	20000	15025	15500	15570
Nozzle diameter	2.3 mm	2.3.5 mm	4.6.8.10 mm	6.8.10 mm	8.10.12 mm
Inlet pressure	>0.05 Mpa	>0.05 Mpa	>0.05 Mpa	>0.05 Mpa	>0.05 Mpa
Throughput	≈100 kg/h	≈500 kg/h	≈1200 kg/h	≈2000 kg/h	≈3000 kg/h
Motor type	Series motor	Y90S-2	Y90S-2	Y90L-2	Y100L-2
Motor power	0.6 kw	1.5kw	2.2 kw	3.0 kw	3.0 kw
Motor speed	0-4500 r/min	2840 r/min	2880 r/min	2880 r/min	2880 r/min
Size	580*650*750mm	800*400*1200 mm	800*700*1400 mm	850*500*1600 mm	800*700*1600 mm
Weight	120Kg	300Kg	460Kg	610Kg	520Kg

Main Characteristics

1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional
tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the
machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials
which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil,
fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Application:

Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.