Yeast Centrifuge Separator is widely used in brewery for separation of yeast and clarification of beer. The liquid seal technology may functionally prevent from loss of carbon dioxide and avoid mixing of air during separating beer. The model is also used to separate similar material (e.g. Juice, beverage etc.)
The machine adopts automatic control, and has the advantages of high efficiency, low material consumption, convenient operation and economic maintenance cost. It adopts small piston structure for gaining variable discharging capacity, and PLC control both partly and fully discharging in order to get rid of sediment. The clear liquid is pumped out by centripetal pump, the sludge is discharged automatically and partly. The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
Technical Parameters:
| Item |
Parameter |
| Model number |
DBQ470 |
| Capacity |
~ 1000L-10000L/h(depend on solid contentl) |
| Disc diameter |
450mm |
| Slag volume |
5.7L |
| Disc half cone Angle |
40° |
| Number of discs( Piece) |
90+/5 |
| Rod form |
Oblique form |
| Disc clearance |
0.45mm |
| Drum speed |
5300r/min |
| separation factor |
8000 |
| Design discharge pressure Mpa |
0.2~0.3 |
| Feeding way |
pressure- feed |
| Method of discharge of solids |
Automatic slag removal |
| Operating water operation mode |
Intermittent discharge |
| Shock Absorption System |
Damping damper |
| Noise |
≤ 80dBA |
| Power |
15kw |
| Motor speed |
2850r/min |
| Phase/ frequency/ voltage |
3P/50~60Hz/380V |
| Explosion-proof rating (should be required) |
No |
| Protection grade |
IP54 |
| Start way |
Friction starts |
| Braking way |
Free shutdown |
| downtime |
About 10 min (natural shutdown about 35 min) |
Net weight :
Outline dimension(L*W*H) |
About 1500Kg |
| 1500*1400*1600 |
Audited Supplier 
){kind=link}
){kind=link}