Product Description
Shenzhou High Speed Dewatering Tubular Centrifuge in Food Industry
Main Purposes
GF/GQ Model Tubular Separatoris used for separating various emulsion, especially for liquid-liquid separation with slight gravity difference and liquid-liquid-solid separation with a little foreign matter, such as transformer oil, turbine oil, lubricant, fuel oil, dye, fat, sapnificatio and various micropowder and for purifying span-80 liquid separating various oral liquid and medical liquid and "920" and plasma and biologic medicine, extracting plasma from animals' blood, refining phosphatide of bean, etc. and treating sewage and separating oil and water.
Type GQ separator is used for separation of various suspension which is difficult to be separated especially for separation of solid-liquid suspension which has low concentration, high viscosity, small granularity and very small difference of solid-liquid gravity, such as clarification of various oral liquid, desludgemetn of coal tar and graphite, extraction of protein, seaweed and jelly, refinement molasses, separation of blood and settlement of vaccine hypha and various dextroses and purifying paint, dye, various resin and rubber solution molasses and refinement or vegetable oil.
Working Principle
This kind of separator is consisted of main body, driving device, bowl, collecting pan and liquid-in bearing seats. The upper part of the bowl is flexible mainshaft and the lower part of the bowl is damp floating bearing. The mainshaft connected with a driven wheel by the buffer coupling seat, power transmitted by the motor to the drive wheel through the transmission belt and the tensioner to make the bowl rotate around its own axis at a high speed therefore it forms a strong centrifugal force field. The product sprays into the liquid inlet by the bottom liquid inlet; liquid is forced by centrifuge force to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
Application:
Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
Product Paramenters
|
TYPE |
GQ75 |
GF75 |
GQ105 |
GF105 |
GF150 |
GQ150 |
GF125 |
GQ125 |
|
|
|
Inner diameter of bowl(mm)_ |
75 |
75 |
105 |
105 |
142 |
142 |
125 |
125 |
|
|
Efficient height of bowl |
450 |
450 |
730 |
730 |
730 |
730 |
730 |
730 |
|
|
Available volume of bowl |
2.67 |
2.67 |
6 |
6 |
10 |
10 |
8 |
8 |
|
|
The highest speed of bowl(R/min) |
21000 |
21000 |
19000 |
19000 |
15000 |
15000 |
16000 |
16000 |
|
|
The biggest separating factor |
22500 |
22500 |
21000 |
21000 |
16400 |
16400 |
18000 |
18000 |
|
|
The diameter of charging nozzle |
2,3,5 |
2,3,5 |
4,6,8, |
4,6,8, |
4,6,8,10 |
4,6,8,10 |
4,6,8,10 |
4,6,8,10 |
|
|
The pressure of charging inlet |
>0.05MPa |
>0.05MPa |
|
Capacity |
~400 |
~400 |
~1400 |
~1400 |
~2400 |
~2400 |
~2400 |
~2400 |
|
|
Motor |
1.5 |
1.5 |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
|
|
Dimenstion |
600×800
×1300 |
600×800
×1300 |
600×800
×1600 |
600×800
×1600 |
800×800
×1600 |
800×800
×1600 |
800×800
×1600 |
800×800
×1600 |
|
|
Machine weight(Kg) |
200 |
200 |
450 |
450 |
500 |
500 |
480 |
480 |
Main Characteristics
1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional
tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the
machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials
which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil,
fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.
PRODUCT PACKAGING
Company Profile
Reyes Import & Export Co., Ltd. belongs to REYES international Group. We are the professional manufacturer of Centrifuge & Separator, Liquid Filling Machine and packing machine. With many years producing experience, our factory have become leading manufacturer with professional technical team and Independent after-sale department.
Our international trade department can supply the whole project service. With many years development, we have known which factories have strong product with competitive price and we have built long-term and stable cooperation relationship with them. Our main area are the food and pharmacy project. Our successful project are coconut oil production line, liquid filling production line, packing production line and the tablet press production line, soft gelatin production line and so on. Our aim is providing you efficiently solution and superior after-service. We sincerely hope YOU are our next customers!
Exported country:
At present, our products have been exported to South Korea, India, Denmark, Russia, Georgia, Jordan, Bangladeshi, Tailand, Ethiopia, Finland, the United States, Canada, Australia, Spain, Japan, Colombia, Romania and so on more than 30 countries
FAQ
1. What certificates do you have?
We can provide CE, ISO 9001, etc
2. What is the warranty period of the equipment?
Normally 1 year warranty.
3. Can we visit your factory?
Of course, we sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by
telephone video conference.
4. What's payment you accept?
A4: T/T, Western Union, L/C, Ali Pay, etc
5. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
Our service
The technical and after-sale services are listed as follows:
1. Provide free technical training, guidance and information of accessories.
2. Our technical staff could instruct our customers on the installation of connector and accessories , and deal with technical and quality issues.
3. Our products with 1 years' warranty and life maintenance.
4. 24-hour hot line: 86-18941925296 . Once receive the customer complaints, we will response within 24 hours.
5. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.
6. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.
7. Our company will provide perfect after-sale services and technical support.
Contact person: Cathy
Once receive the calling of complaints, we will respond to it within 12 hours at working time and provide solution within 48 hours. If necessary, our company will send technical staff there and provide on-site solution.
Audited Supplier 
){kind=link}
){kind=link}