Customization Hollow Blade Dryer Clay Sludge Drying Equipment for Sale

• Customization: Available
• After-sales Service: 24 Hours on Line
• Warranty: 1year
• Model NO.: LYSZ
• Type: Drum Drying Equipment
• Application: Slurry
• Roller Number: Single Drum
• Fluid Bed Drying Equipment Type: Horizontal Fluid Bed
• Condition: New
• Product Name: Hollow Paddle Dryer
• Voltage: Client Local Standard
• Keywords: Hollow Harrow Rotary Stirring Drying
• Feature: High Efficiency Low Cost
• Function: Drying+Dehumidity
• Material: SUS304, SUS304L, SUS316, SUS316L, Ti, Other
• Transport Package: Export Wooden Case
• Specification: 7570*1676*1778mm
• Trademark: shenzhou
• Origin: China

Product Description

Complete models support customization hollow blade dryer clay sludge drying equipment for sale

 

 

Hollow blade dryer is a horizontal stirring type dryer that mainly focuses on heat conduction. Due to the hollow mixing blades resembling ship paddles, they are collectively referred to as hollow blade dryer. Due to the fact that the heat required for the drying process of this equipment relies on indirect heating through heat conduction, only a small amount of gas is required to carry away moisture during the drying process, which greatly reduces the loss of heat carried away by the gas and improves the utilization rate of heat. The hollow blade dryer is an energy-saving drying equipment. It is suitable for drying granular and powder materials, and can also smoothly dry paste materials.

 

 

Compact structure: The main heat transfer component of the dryer is the shovel shaped blades, which are densely packed and arranged crosswise on a fixed rotating shaft at specified intervals, resulting in higher heat transfer per unit volume. For this reason, this device has a very compact structure and a small footprint.

High heat transfer efficiency: Due to the excellent continuous mixing and stirring of raw materials, the relatively rotating shovel shaped blades and inclined blade surfaces, as well as the heating and cooling of the body, ensure that all surfaces in contact with the product can evenly transfer heat energy.

Self cleaning performance: Due to the relative rotation of the blade movement, they have a continuous self-cleaning effect on the nearby inner surface. The products that adhere to each other and accumulate on the blades can be removed and re-entered into the production process.

Simple control: The drying process and residence time can be easily checked, controlled, and adjusted. They can be individually set and adjusted based on the physical properties of the dried product, including the number of shafts or blades, rotational speed, temperature of the heat exchanger, and drying time.

The generated dust and odor are relatively small: due to the small gas flow used during the drying process, the dust and odor that can be generated are also very small. Therefore, the vacuum cleaner or deodorizer used in conjunction with it is also very small or unnecessary to use at all.

Almost no wear and material loss: the rotational speed of the blades is very low, only 10 to 40 revolutions per minute, which effectively avoids wear and rapid wear of machine equipment caused by wear. In addition, the risk of metal material rupture is also minimized.

Suitable for drying products with high humidity: due to the use of paddle type drying elements and continuous mixing and stirring, it can dry materials with high viscosity and high humidity. Its structural design avoids product accumulation in dead corners and overheating or spoilage caused by product accumulation.

Hollow shaft dense arrangement with the wedge-shaped hollow blade, the heat medium through the hollow shaft flow through the blade. The effective volume of heat transfer area is very large, the heat medium can be water vapor, can also be hot water or heat conducting oil. The heat transfer medium flows through the shell jacket and the hollow stirring shaft through the rotating joint, and the hollow stirring shaft has a different internal structure according to the type of the heat medium to ensure the best heat transfer effect.In the pulp and jacket access to hot oil, heating at the same time, the upper part of the discharge port at the same time through the heated dry air after further drying, thus greatly increasing the drying strength of the device. Evaporated moisture from the tail gas out of the dryer, wet air discharged by the induced draft fan outdoors.

 

 

Model		SZ-2.7	SZ-9	SZ-13	SZ-18	SZ-24	SZ-29	SZ-36	SZ-41
Heat transfer area		2.7	9	13	18	24	29	36	41
Effective  volume(m²)		0.06	0.32	0.59	1.09	1.53	1.85	2.42	2.8
Revolution(r.m.p		15-30	10-25	10-25	10-20	10-20	10-20	10-20	10-20
Powder (kw		2.2	4	5.5	7.5	11	11	15	15
Width of dryer body(mm)		306	584	762	940	1118	1118	1296	1296
Total width(mm)		736	841	1066	1320	1474	1474	1676	1676
Length of dryer body(mm		1956	2820	3048	3328	3454	4114	4115	4724
Total length (mm)		2972	4876	5486	5918	6147	6808	6960	7570
Distance  between  feeding and   discharging(mm)		1752	2540	2768	3048	3150	3810	3810	4420
Height in center(mm)		380	380	534	610	762	762	915	915
Total height(mm)		762	838	1092	1270	1524	1524	1778	1778
Steam inlet		(2)3/4	(2)3/4	(2)1	(2)1	(2)1	(2)1	(2)1	(2)1
Water outlet		(2)3/4	(2)3/4	(2)1	(2)1	(2)1	(2)1	(2)1	(2)1
Model	SZ-48	SZ-52	SZ-62	SZ-68	SZ-73	SZ-81	SZ-87	SZ-36	SZ-110
Heat transfer area	48	52	62	68	73	81	87	95	110
Effective volume(m²	3.54	3.69	4.79	5.21	5.78	6.43	7.39	8.07	9.46
Revolution(r.m.p	10-20	10-20	10-20	10-20	5-15	5-15	5-15	5-15	5-10
Powder (kw	30	30	45	45	55	55	75	75	95
Width of dryer body(mm)	1474	1474	1651	1652	1828	1828	2032	2032	2210
Total width(mm)	1854	1854	2134	2134	2286	2286	22438	2438	2668
Length of dryer body(mm)	4724	5258	5410	5842	5461	6020	5537	6124	6122
Total length (mm)	7772	8306	8865	9296	9119	9678	9119	9704	9880
Distance between feeding  and discharging(mm)	4420	4954	4953	5384	5004	5562	5080	5664	5664
Height  in center(mm	1066	1066	1220	1220	1220	1220	1220	1220	1220
Total height(mm)	2032	2032	2362	2362	2464	2464	2566	2566	2668
Steam inlet	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)2	(2)2	(2)2
Water outlet	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)11/2	(2)2	(2)2	(2)2