| Customization: | Available |
|---|---|
| After-sales Service: | Permanent Technical Support |
| Warranty: | 1 Year Warranty for Equipment Spare Parts |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Product Description |
1.Diagram Of Beer centrifuge
The beer centrifuge separator DBQ is mainly used for the clarification of beer and malt, and also in the use of clarifying and purifying similar materials such sparkling wine, fruit juice and drinks and so on. The centrifuge and parts which contact with materials are stainless steel, according to the food hygiene requirements.
2.Working Principle Of Product
Defined yeast cell counts were necessary in order to achieve the desired programmed maturing and storage; the solution was provided by a separator. With this machine, the yeast cell counts were adjusted variably to the desired technical value after main fermentation
3. Applications Of Product
The Beer Centrifuge Separator is mainly used in brewery for separation of yeast and clarification of beer.
The liquid seal technology may functionally prevent from loss of carbon dioxide and avoid mixing of air during separating beer.
The machine adopts automatic control, it has the advantages of high efficiency, low material consumption, convenient operation and economic maintenance cost.
The clear liquid is pumped out by centripetal pump, the sludge is discharged automatically and partly.
Centrifuging is a process where the beer is spun around in a vessel at a few thousand RPM until the yeast is pressed to the side of the vessel due to centrifugal force. This processes clears the beer of most visual yeast cells, and depending on how strong the centrifuge is, can remove almost all of
3 the requirements
1, after separation, , the CO2 in the beer should meet the GB4927 and GB/T 4928.
2, The clarified liquid outlet pressure of the separator should be at least not less than 1.47*105 MPA.
3, Parts and seals in contact with beer shall comply with the regulations (GB2758/ GB4927 OR gb/t 4928 )and shall not affect the sensory, color and hygiene requirements of the beer.
4,the machine should be easy to wash.
|
Product Feature of Disc Separator centrifuge |
1.Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise
and vibration, the installation path is very easy to operate.
2.The bearings use imported F-A-G, transducer using Japan brand " Fuji", the main strengthen parts of Roller body and Roller cover use 2Cr13,
and the other parts of contacted materials such as Disc all use 304L.
3.The Stainless steel cover use SUS304
4.The base use casting steel, coating does the same way as ship bottom.
|
Product parameters of Disc Separator centrifuge |
|
Model |
Capacity (L/h) |
Basket Diameter (mm) |
Settlement area *107cm2 |
Power (KW) |
speed |
|
DBP315 |
2000-4000 |
315 |
7-14 |
7.5 |
7100-6300 |
|
DBP400 |
4000-7000 |
400 |
14-20 |
11 |
6700-5600 |
|
DBP450 |
7000-10000 |
450 |
20-35 |
15 |
6300-5300 |
|
DBP500 |
10000-15000 |
500 |
35-45 |
18.5 |
6000-5000 |
|
DBP530 |
15000-20000 |
530 |
45-60 |
22 |
5600-4750 |
|
DBP560 |
20000-25000 |
560 |
60-80 |
30 |
5300-4500 |
|
DBP600 |
25000-35000 |
600 |
80-130 |
37 |
5000-4000 |
Quality guarantee
1.Separator manufactured in compliance with quality guaranteen system of ISO9001-2000.
2.The Seller shall guarantee that the separator manufactured in compliance with quality guarantee standard of JB/T8103-2005.
3.The guarantee period shall be 1 year counted from the date on which the commodity arrives at the port of destination.
){kind=link}