Separator Machine Tubular Centrifugal Centrifuge Used for Waste Oil Recycling

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: GF/GQ
• Type: Centrifuge
• Object: Solid-Liquid
• Separation Mode: 3 Phase Separation
• Operating Type: Continuous Type
• Installation: According to The Instructions
• Centrifuge Type: Tube Centrifuge
• Distillation Equipment Type: Essential Oil Distillation Equipment
• Extraction Tower Type: Turntable Tower
• Pressure: According to The Model
• Condition: New
• Material: 304/316/2304/2205/2507
• Certification: CE/ISO9001
• Service Life: Over 20 Years
• Operation: PLC
• Transport Package: The Wooden Case
• Specification: 760x450x1680 mm
• Trademark: Shenzhou
• Origin: China
• Package Size: 70.00cm * 50.00cm * 150.00cm
• Package Gross Weight: 980.000kg

Product Description

Product Description

The Feature

The centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle.

The Application

it has been widely used in pharmaceutical, health food, drinks, chemical industries to separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.

Working principle

On the top of drum is the flinch axis, under is the damp drift bearing. Main axis linked by buffer and passive wheel, via conveyor belt, fasten wheel, the dynamic is transmit to drum and it will rotate axes to run at rapid speed.The stuff is ripped into via liquid inlet, under the centrifuge force, the stuff along the wall of drum flow upward.

Structure

Drum is composed by upper cover, regulate loop, bottom cover drive the hollow axis and pipe drum. In the drum, there install 4 wing panels, make the liquid easily reach the speed of running corner. Discharge the liquid from the two outlets on the top of the drum, and then the liquid flow into the accumulating tray and tanks.

1.Drum, main axis and flinch joint hang on the belt wheel, the wheel combined other parts composed of machine head.
 

2.The upper end of the axis support on the buffer and the drum linked by nut.

Technical parameters
 

	GF105	GF145
Drum speed	16300/min	14000r/min
Max centrifugal force	15750 R.C.F	16900
Drum inner diameter	∮105mm	∮145mm
Drum effective length	730mm	770mm
Solid volume in drum	6L	8-12L
Stuff inlet pressure	<0.1Mpa	<0.1Mpa
Output (water flux)	1500L/H	2500L/H
Motor power	2.2kw	3kw

 

 

Main parts