Continuous Beer Industrial Separator Machine Disc Centrifuge

• Customization: Available
• After-sales Service: Permanent Technical Support
• Warranty: 1 Year Warranty for Equipment Spare Parts
• Model NO.: DBP
• Object: Beer Separation
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Certification: GMP/CE/ISO
• Material: Ss 304L or Ss 316L
• Bearing: S-K-F, NSK as Optional
• Transport Package: Wooden Case
• Specification: material: stainless steel
• Trademark: SHENZHOU
• Origin: China
• Production Capacity: 500sets/Year
• Package Size: 1000.00cm * 1200.00cm * 1200.00cm
• Package Gross Weight: 1500.000kg

Product Description

Product Description

 

It is Used for beer pre-clarification, imported for sealing, and outlet for centripetal pump.

2, Operating temperature

 

1, not higher than 50 degree.

 

2, the temperature  : Pre-clarification or clarification of of the leavened beer is 0-5 degrees.

For other occasions, the temperature of the young beer is 5-8 degrees, the cold wort is 7-10 degrees, and the hot wort is 60-90 degrees.

 

3 the requirements

 

1, after separation, , the CO₂ in the beer should meet the GB4927 and GB/T 4928.

 

2, The clarified liquid outlet pressure of the separator should be at least not less than 1.47*10⁵ MPA.

 

3, Parts and seals in contact with beer shall comply with the regulations (GB2758/ GB4927 OR gb/t 4928 )and shall not affect the sensory, color and hygiene requirements of the beer.

 

4,the machine should be easy to wash.

 

Product Feature of Disc Separator centrifuge

 

1.Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise 

and vibration, the installation path is very easy to operate.

 

2.The bearings use imported F-A-G, transducer using Japan brand " Fuji", the main strengthen parts of Roller body and Roller cover use 2Cr13,
and the other parts of contacted materials such as Disc all use 304L.

 

3.The Stainless steel cover use SUS304

 

4.The base use casting steel, coating does the same way as ship bottom.

 

Product parameters of Disc Separator centrifuge

 

                       

Model	Capacity (L/h)	Basket Diameter (mm)	Settlement area *10^7cm^2	Power (KW)	speed
DBP315	2000-4000	315	7-14	7.5	7100-6300
DBP400	4000-7000	400	14-20	11	6700-5600
DBP450	7000-10000	450	20-35	15	6300-5300
DBP500	10000-15000	500	35-45	18.5	6000-5000
DBP530	15000-20000	530	45-60	22	5600-4750
DBP560	20000-25000	560	60-80	30	5300-4500
DBP600	25000-35000	600	80-130	37	5000-4000

 

 

Separator advantages 

1. Continuous feeding 

2. High separation factor 

3. Automatic residue discharging 

4. CIP 

5. Hydraulic coupling driving with longer service lift 

6. PLC system automatic control 

7. Good milk skimming performance 

8. High efficiency 

9. Lower engergy consumption

10. Soft feeding or discharging  of the inelet and outlet  


 

Quality guarantee

1.Separator manufactured in compliance with quality guaranteen system of ISO9001-2000.

2.The Seller shall guarantee that the separator manufactured in compliance with quality guarantee standard of JB/T8103-2005.

3.The guarantee period shall be 1 year counted from the date on which the commodity arrives at the port of destination.


 

Introduction of Company:

SHENZHOU Group has set-up a 1st class in-house laboratory for chemical composition analysis, metallographic analysis, spectrum analysis, performance analysis, radiographic inspection, magnetism inspection, ultra-sonic inspection and etc. This is to imply with the latest advance instrumentations and rigorous working attitude to ensure every part of product is stable and reliable.

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.

Contacts: Mark