GF45/75/105/115/125/150 Industrial Separating Tubular Centrifuge

• Customization: Available
• After-sales Service: Video Online Support
• Warranty: 1 Year
• Model NO.: GF105
• Type: Centrifuge
• Object: Liquid-Liquid-Solid
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Extraction Tower Type: Turntable Tower
• Pressure: ≥0.05MPa
• Condition: New
• Name: Tubular Bowl Centrifuge
• Ietm: Industrial Separating Tubular Centrifuge
• Discharge: Manual
• Material: 304/316L Stainless Steel
• Voltage: 220V 380V 480V or Customization
• Key Selling Points: Easy to Operate
• Core Components: PLC, Engine, Motor
• Transport Package: Depending on The Type
• Specification: 200-600kg
• Trademark: SHENZHOU
• Origin: China
• Package Size: 60.00cm * 60.00cm * 130.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Description

It is suitable for the separation of various difficult-to-separate emulsions, especially for liquid-liquid separation where the density difference between the two phases is very small (the specific gravity difference is greater than 0.1), and the liquid-liquid-solid three-phase separation with a small amount of solid phase impurities

Liquid-Liquid-Solid Centrifugal Filters Oil Water Separation Tubular Centrifuge

The centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has t types, one is GQ two phase that can separate solid from the liquid, another is GF series, which  can separate the water, solid from the oil.

 

GF model: Liquid with big density forms the outer liquid circle, while liquid with small density forms the inner circle. Then liquid will flow out of the upper outlet accordingly, and those little solid will be deposited on the drum wall, and be removed by manual after machine stops.

GQ model: Solid particles with big density are gradually deposited on the drum's inner wall, and forms sediment layer, after machine is stopped, is removed by manual. While the clarified liquid flows out through the outlet on the upper of the drum.

Working principle of Tubular Separator
Consist of the machine cover, driving device, drum, liquid catch tray, the liquid inlet and bearing seat, this separator with high running speed, belongs to sedimentation separator. The upper drum is a flexible shaft, while the lower is damping floating bearing. The main shaft is connected by a coupling buffer and a passive wheel. Motor transmit power from the transmission belt and tension wheel to passive wheel, to drive the drum rotate around its own axis with high-speed, and thus form a strong centrifugal force field. All the materials are fed from liquid inlet under the bottom, and flow upward along the drum wall by centrifugal force fluid. During this process, the dense liquid phase forms the outer ring, and the small liquid phase forms the inner ring, which separately flow to respective liquid outlet mounted on the upper drum.
When the thickness of the sediment affect the liquid phase clarification or the capacity of the rated slag weight in the drum, the dregs of the drum wall should be removed manually after the shutdown.

Application:

Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.

Product Paramenters

Model		GQ/F57	GQ/F75	GQ/F105
Bowl	Inner diameter (mm)	57	75	105
	Effective height (mm)	240	450	730
	Settling volume (L)	0.38	2.67	6
	Rotary speed (r/min)	30000	21000	19000
	Max separation factor	28500	22500	21000
Nozzle diameter (mm)		2/2.5/3	3/4/6	4/6/8/10
Material Inlet pressure (Mpa)		≥0.05Mpa
Motor Power(kw)		0.55	1.5	2.2-3.0
Water capacity(L/H)		267	670	1600
Note: Above parameters are for reference only

Main Characteristics
1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional
tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the
machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials
which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil,
fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.
PRODUCT PACKAGING
Company Profile