100L Double Cone Vacuum Rotary Dryer with Steam Steam Generator Condenser System

• Customization: Available
• After-sales Service: 24 Hours on Line
• Warranty: 1year
• Model NO.: Shenzhou
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Drying Medium: Superheated Steam
• Operational Method: Continuous
• Type: Double Cone Rotating
• Voltage: 220V-480V
• Dimension: 1.8-5.2m
• Evaporation Capacity(Kg/H): 100
• Capacity: 100L-8000L
• Vacuum Degree: Max 100PA
• Drying Efficiency: 90%
• Transport Package: Wooden Case
• Specification: 210X90X200 cm
• Trademark: shenzhou
• Origin: China
• Package Size: 380.00cm * 180.00cm * 320.00cm
• Package Gross Weight: 4000.000kg

Product Description

Product descriptions from the supplier

Principle

1. When the heat source (hot water, low pressure steam, or thermal oil) pass through the sealed jacket, the heat will be
transmitted to raw material through the inner shell;

2. Under action of driving power, the tank is rotated slowly and the raw material is mixed continuously. The purpose of reinforced drying can be realized.

3. The raw material is under vacuum condition.When steam pressure is dropping, it makes the moisture (solvent) at the surface of raw material become saturation and then evaporates. The solvent will be discharged through vacuum pump.

4. The moisture (solvent) of raw material will infiltrate,evaporate and discharge continuously.

5. The production processes are carried out continuously and the drying can be done in a short time.

Features

The dryer is suitable for drying and mixing powder or granule shape raw material of foodstuff industry and so on.

Flammable and explosive material drying should be clamed.

Material:SS304/SS316L/SS321 etc, inner wall is enamel for your choice.

We recommend being adopt speed adjustable control and central axis integrated procession when the volume of machine is larger
than 2000L

Working Principle

• Heat energy (such as hot water, low-pressure steam or thermal oil) is fed into the closed jacket,
  and the heat is transferred to the dried materials through the inner shell.

• Under the power drive, the tank rotates slowly, and the materials inside the tank are
  mixed continuously,so as to achieve the purpose of intensive drying.
• The material is in vacuum state, the vapor pressure drops so that the water on the surface of the
  material (solvent) reaches saturation and evaporates, and is discharged by the vacuum pump
  in time for recovery. The water (solvent) inside the material continuously penetrates to the surface, evaporates and discharges the three processes continuously, and the material achieves the
  purpose of drying in a very short time.

Technical specification

1.1 Equipment model: SZG-3000;
1.2 Maximum installed capacity: ≤1500L;
1.3 Heating area: 9.6m²;
1.4 Cylinder speed: 0-8r/min;
1.5 Motor power: 7.5KW; motor explosion-proof
1.6 Explosion-proof grade: dIIBT4, protection grade: IP55;
1.7 Tank inner diameter: φ1800mm;
1.8 Inlet heat pipe diameter: DN32, steam heating
1.9 Vacuum pipe diameter: φ60;
1.10 Main machine size: 3800×1800×3200
1.11 Equipment weight: 4000Kg;
1.12 Inner liner material: SUS316L
1.13 Design temperature: room temperature~160ºC;
1.14 Design pressure inside the tank: -0.1MPa;
1.15 Vacuum degree:
No-load ultimate vacuum is not less than -0.097Mpa; vacuum leakage rate of less than 10mbar/h
1.16 Noise: less than 70dB 
 

Name/Specifications	100	350	500	750	1000
Tank volume	100	350	500	750	1000
Charging volume (L)	≤50	≤175	≤250	≤375	≤500
Heating area (m2)	1.16	2	2.63	3.5	4.61
rotate speed (rpm)	4 - 6
Motor power (kw)	0.75	1.1	1.5	2	3
Floor space L x W (mm)	2160×800	2260×800	2350×800	2560×1000	2860×1300
Slewing height (mm)	1750	2100	2250	2490	2800
Tank design pressure (Mpa)	-0.1-0.15
Jacket design pressure (Mpa)	≤0.3
operating temperature (^oC)	Tank ≤85 Jacket ≤140
weights (kg)	800	1100	1200	1500	2800

 

Name/Specifications	1500	2000	3500	4500	5000
Tank volume	1500	2000	3500	4500	5000
Charging volume (L)	≤750	≤1000	≤1750	≤2250	≤2500
Heating area (m2)	5.58	7.5	11.2	13.1	14.1
rotate speed (rpm)	4 - 6
Motor power (kw)	3	4	5.5	7.5	11
Floor space L x W (mm)	3060×1300	3260×1400	3760×1800	3960×2000	4400×2500
Slewing height (mm)	2940	2990	3490	4100	4200
Tank design pressure (Mpa)	-0.1-0.15
Jacket design pressure (Mpa)	≤0.3
operating temperature (^oC)	Tank ≤85 Jacket ≤140
weights (kg)	3300	3600	6400	7500	8600