LPG Industrial Spray Dryer Price

• After-sales Service: Permanent Technical Support
• Warranty: 1 Year Warranty for Equipment Spare Parts
• Heating Mode: Customerized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LPG
• Material Status: Solution
• Atomization: Gas Atomization
• Flow: Parallel Flow
• Heat Source: Natural Gas
• Type: Centrifugal Spray
• Bearing: S-K-F
• Material: Ss 304L or Ss 316L
• Transport Package: Wooden Case
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 500sets/Year
• Package Size: 1500.00cm * 1000.00cm * 1700.00cm
• Package Gross Weight: 1000.000kg

Product Description

Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as:solution, emulsion, suspension and pumpable paste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies. 

After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower. 

The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. 
Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality.

item\parameter\spec	LPG
	5	25	50	100	150	200-2000
inlet temperature °C	140-350 automatically controlled
outlet temerature °C	~80-90
Max.water evaporation capacity	5	25	50	100	150	200-2000
centrifugal spraying nozzle transmission mode	compressed air transmission	Mechanical transmission
Rotation speed rpm	25000	18000	18000	18000	15000	8000-15000
sprayingdesc diameter mm	50	100	120	140	150	180-340
Heat supply	Electricity	Electricity+steam	Electricity+steam,fuel oil and gas			Settled by users themselves
Max.Electric heating power kw	9	36	63	81	99
overall dimensions m	1.8×0.93  ×2.2	3×2.7  ×4.26	3.7×3.2  ×5.1	4.6×4.2  ×6	5.5×4.5  ×7	Depends on the concrete conditions
Dried powder restoring tate %	≥95	≥95	≥95	≥95	≥95	≥95
Note:For the water evaporation capacity, material property,the inlet and outlet tempratures,please refer the following diagram for reference.

Features

1.Fine droplets are dried in the drying camber by supplying hot air through the inlet.
2.The surface of the liquid drop is dried immediately to form a tough shell.
3.Further the liquid inside must escape by diffusing through the shell at a particular rate.
4.At the same time heat transfer from outside to inside takes place at a rate greater than liquid diffusion rate.
5.As a result heat inside mounts up which allows the liquid to evaporates at faster rate.
6.This tendency of a liquid leadsto rise in the internal pressure which causes the droplets to swell.
7.The shells thickness decreases where as permeability for vapour increases.
8.If the shell is neither elastic nor permeable it ruputur and the internal pressure escapes.
9.The temperature of the air is adjusted in such a way that the droplets should be compeletly dried before reaching the walls of the drying chamber.
10.The products should not be over heated at the same time.

attention to order 
Liquid name and propertysolid contents(or water contents),viscosity,surface tension and PH value. 
Dry powder density residual water contents allowed,particle size,and maximum temperature allowed. 
Output:shift time daily. 
Energy that can be suppliedsteam pressure ,electricity properly,fuel of coal,oil and natural gas. 
Control requirement:whether or not the inlet and outlet temperatures should be controlled. 


 

size	A	B	C	D	E1	E2	F	G	H	I
LPG-25	1290	3410	4260	1800	1200	1200	1000	1700	1300	1550
LPG-50	1730	4245	5100	2133	1640	1640	1250	1750	1800	1600
LPG-100	2500	5300	6000	2560	2100	2100	1750	1930	2600	1780
LPG-150	2800	6000	7000	2860	2180	2180	1970	2080	3050	1960
LPG-200	2800	6600	7300	3200	2300	2300	2210	2250	3050	2100
LPG-300	2800	8000	8700	3700	2800	2800	2520	2400	3050	2250

Application

1.Spray dryer can be used for drying of ny substances both in solution or in suspension.
2.Spray dryer are very useful for the drying of thermolabile substances.
3.Citric acid, borax, sodium phosphate, hexamine, gelatine and extracts are dried by a spray dryer.
4.The suspensions of starch, barium sulphate and calcium phosphate are also dried by the spray dryer.
5.Milk, soap and detergents too are dried by a spray dryer.