| After-sales Service: | Permanent Technical Support |
|---|---|
| Warranty: | 1year |
| Type: | Centrifuge |
| Object: | Beer Filtration and Clarification |
| Separation Mode: | Filter Type |
| Operating Type: | Continuous Type |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier DBQ series separator is one of separators with nozzle around the bowl. It is Used in concentrating barm water with yeast content 10%-30%. It is widely used in concentrating in the industries as barm ,wine, brewage and pigment.
This product absorbs the advantage of the same kind foreign product in Germany All the parts that may contact the feedstock are made of stainless steel. Availably reduce the chemical effect of the feedstock and the machine spare parts.
It is made up of feed and discharge device, bowl, hood, driving device vertical, driving device horizontal, frame and motor. Bowl has been precise dynamic balance test . Power drive adopts the triction clutch, Transfer power by the fluid, start reliably, prevent overland. The bearings used the machineare S-K-F grade in Sweden., guarantee working precision of the machine.
When working, The mixture fluid to be processed are fed to the bowl from feeding pipe 1, Under the effects of centrifugal force, the solids which has heavier density collects on the bowl wall, it include barms and yeasts, simultaneity. the separated solids are ejected from the nozzle 3 under the bowl . The lighter liquid flow along the inner side of the discs into the passage in the distributor,the lighter product is discharged from the machine from outlet2. Thus the machine can work continuously for a long time, attain good separation effects in long run. 
Yeast Centrifuge Separator is widely used in brewery for separation of yeast and clarification of beer. The liquid seal technology may functionally prevent from loss of carbon dioxide and avoid mixing of air during separating beer. The model is also used to separate similar material (e.g. Juice, beverage etc.)
The machine adopts automatic control, and has the advantages of high efficiency, low material consumption, convenient operation and economic maintenance cost. It adopts small piston structure for gaining variable discharging capacity, and PLC control both partly and fully discharging in order to get rid of sediment. The clear liquid is pumped out by centripetal pump, the sludge is discharged automatically and partly. The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
Technical Parameters:
| Item | Parameter |
| Model number | DBQ470 |
| Capacity | ~ 1000L-10000L/h(depend on solid contentl) |
| Disc diameter | 450mm |
| Slag volume | 5.7L |
| Disc half cone Angle | 40° |
| Number of discs( Piece) | 90+/5 |
| Rod form | Oblique form |
| Disc clearance | 0.45mm |
| Drum speed | 5300r/min |
| separation factor | 8000 |
| Design discharge pressure Mpa | 0.2~0.3 |
| Feeding way | pressure- feed |
| Method of discharge of solids | Automatic slag removal |
| Operating water operation mode | Intermittent discharge |
| Shock Absorption System | Damping damper |
| Noise | ≤ 80dBA |
| Power | 15kw |
| Motor speed | 2850r/min |
| Phase/ frequency/ voltage | 3P/50~60Hz/380V |
| Explosion-proof rating (should be required) | No |
| Protection grade | IP54 |
| Start way | Friction starts |
| Braking way | Free shutdown |
| downtime | About 10 min (natural shutdown about 35 min) |
| Net weight : Outline dimension(L*W*H) |
About 1500Kg |
| 1500*1400*1600 |
Contacts: Mark
Shenzhou Group Co., Ltd
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}