Large Volume Full Automatic Centrifugal Leaf Protein Extraction Machine Decanter Centrifuge

• After-sales Service: Permanent Technical Support
• Warranty: 1 Years
• Type: Centrifuge
• Object: Detergent Powder
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Model NO.: LWS
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Pressure: Medium Pressure
• Condition: New
• Certification: GMP/CE/ISO
• Material: SS304/SS316L//Duplex Steel 2205/Ti
• Bearing: S-K-F, F-a-G as Optional
• Control System: Variable Frequency Drive
• Electronic Component: ABB or Siemens
• Transport Package: Wooden Case
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: China

Product Description

Operating principle
A centrifuge is a high-speed rotation of a screw and a drum, which accelerates the sludge inside to form a cylindrical liquid ring layer. Under the action of centrifugal force, solid particles with higher density settle on the inner wall of the drum to form a mud 
layer
Then, the relative speed difference between the screw and the drum pushes the solid phase towards the cone end of the drum and pushes it out of the liquid surface. Push the slag discharge port to discharge, and the filtrate is discharged from the large end of the drum through a reflux pipe, achieving solid-liquid separation.

APPLICABLE MATERIAL FOR DEWATERING DECANTER :

Drilling mud, environmental protection sewage, oily sludge, cutting fluid, sand washing water, mineral washing water, soda white mud, salt mud dewatering, magnesium aluminum emulsion, steel-making wastewater, precision casting wastewater, construction mud, tunnel mud, mine wastewater, industrial wastewater, organic wastewater, aquaculture wastewater, chemical industrial wastewater, printing and dyeing wastewater, municipal sewage, river sludge, water plant sludge, lake sludge, kaolin grading, calcium carbonate, bentonite, Silica, titanium dioxide, calcium sulfate, barium sulfate, conductive film glass polishing solution, aluminum hydroxide, cryolite, silicate, oil sand separation, landing oil, oil sludge, coal tar, inorganic fertilizer, Chinese medicine extraction such as taxus chinensis, honeysuckle and liquorice, clarification, concentration and dehydration of salt crystals, etc.

Model	Technical parameter					motor power		outline dimension(mm)	Machine weight (KG)
	(Diameter)mm	Rotation speed rpm	Length mm	Separation factor G	capacity M3/h	Main motor KW	Vice motor KW	Dimension: L×D×H
LW360×1200	360	3500	1200	2467	3-8	11/18.5	7.5/11	2600×1500×850	1900
LW360×1500	360	3500	1500	2062	3-8	11/18.5	7.5/11	2800×1400×850	2000
LW420×1750	420	3200	1750	2406	4-20	30/37	11/18.5	3120×1580×1050	3000
LW450×1600	450	3200	1600	2578	5-25	30/45	11/22	3780×1050×1180	3500
LW450×1800	450	3200	1800	2578	5-25	30/45	11/22	3985×1050×1180	3600
LW450×2000	450	3000	2000	2266	5─25	30/45	11/22	4320×1050×1180	3800
LW500×1800	500	3000	1800	2517	10-30	37/55	15/22	4200×1110×1200	4300
LW500×2100	500	3000	2100	2517	10-30	37/55	15/22	4500×1110×1200	4500
LW550×1800	550	3000	1800	2769	10-35	45/55	18.5/22	4380×1160×1230	4800
LW550×2200	550	2800	2200	2412	10-35	45/55	18.5/30	4780×1160×1230	5000
LW650×1750	650	2000	1750	1454	20-50	75/90	30/37	4576×1300×1250	6000
LW650×2000	650	2000	2000	1454	20-50	75/90	30/37	4900×1300×1250	6200
LW800×2000	800	1800	2000	1450	40-100	90/110	45/55	6052×1460×2100	10000
LW1000×2350	1000	1600	2350	1432	50-140	110/132	55/75	6850×1860×2300	12800

LW SERIES DEWATERING DECANTER CENTRIFUGE FEATURES

• The beach angle of the T Series dewatering centrifuge is 8.5 Degree, which makes the decanter centrifuge cone section longer, that is, the drying and dewatering area of the centrifuge is longer, which is conductive to the dewatering performance of T Series decanter centrifuge, and much drier solid materials discharged.
• The shaft caps on the two ends and the bowl are made of duplex stainless steel SUS2205 or SUS2304 by centrifugal casting, which is superior to the performance of SUS304 and SUS316. The main parts are made by centrifugal casting and die forging process to avoid intergranular corrosion and incomplete residual stress release caused by traditional welding process.
• The screw blade is pressed by the CNC spiral blade forming equipment. Compared with the traditional drawing screw blade, it has higher slag conveying efficiency than the traditional drawing screw blade.
• According to the material properties, the screw blade can adopt gradual change type, which can obviously improve the efficiency of screw's transport and press force to make the solids dryer.
• Optimized beach angle and pitch, large beach angle and medium pitch with BD baffle plate make the dewatering zone separated from the sedimentation zone. The depth of the liquid pool is deeper and the dewatering zone is longer. The separated clear liquid is more clear and dry, and the processing capacity is larger. The deep liquid pool loses less kinetic energy when the clear liquid is discharged. The machine consumes less energy and is more energy efficient. At the same time, it has a material acceleration structure to reduce turbulence in the bowl to make the liquid more clear, reduced turbulence makes the screw flight discharge port better protected for anti-abrasion, so the screw conveyor has a longer service life.
• For special high-concentration and high-viscosity materials, a double cone design can be used, that is, the cone drum has two beach angles. The double beach angle greatly improves the resistance of slag discharge, and increases the treatment capacity under the condition of increasing the slag dryness and liquid clarity.
• The wear-resistant sleeve of the solid discharge port is a special hard tungsten carbide sleeve, of which the wear resistance is extremely high, and not fragile.
• The overflow weir plate has a convenient and flexible design for adjusting the depth of liquid pool to meet the requirements of dryness and wetness and clarity of materials under various working conditions.
• The collection box cover of the small model is assisted to open by a gas spring, and it can support and protect safety.
• The large model adopts a labor-saving lid opening device, and a single person can lift the lid of the collection box, reducing the labor intensity of workers and facilitating equipment maintenance.
• Each type of main bearing is designed with hydraulic disassembly structure, which reduces the tension required to remove the main bearing by 90%, and reduces the risk of damage to the bearing itself and the high precision parts when the bearing is removed.
• After each main rotary parts are machined by high precision CNC equipment, the centrifuge is treated with three dynamic balance processing again, including the 1800RPM medium speed dynamic balance in the main rotary body component, the actual working speed high speed dynamic balance and the whole machine balance, so as to ensure the stable operation of the centrifuge under the high speed working condition.
• The screw propeller is protected by replaceable wear-resistant alloy plate with long service life and easy maintenance.
• Some models adopt the open-type screw blade, greatly enhancing the centrifuge processing capacity. Screw propeller utilizes stainless steel, after high temperature solution treatment, not easy to deform, good corrosion resistance, good strength stiffness, and long service life.
• Two motors are arranged at one end of the centrifuge saving much space; the structure is compact for the operation and maintenance of the centrifuge, while avoiding the accident of the motor damage caused by the material leakage at the inlet end.
• Main bearing adopts premium S-K-F series high-end bearings with long service life. Depending on the user's choice, it can also be equipped with an automatic lubrication system.
• The grease lubrication system for the main bearing of the small model can be equipped with a semi-automatic or fully-automatic batch grease lubrication system, which can provide full and reliable lubrication for the main bearing, reduce the labor intensity of the workers and improve the service life of the bearing.
• The main bearing of the large machine adopts the oil injection automatic circulation lubrication system, which has the function of cleaning and cooling the main bearing, and the service life of the main bearing is greatly improved.
• With complete machine monitoring and alarm system. When overload, short circuit and lack of phase occur in the course of operation, the centrifuge will be automatically protected; the speed of centrifuge, bearing temperature, vibration of the whole machine, lubrication system oil pressure, main and back motors' current, push torque and other operating parameters are monitored in real time, and alarm is started when the parameters are abnormal. In case of blocking materials, the device will automatically switch to the plugging procedures; if plugging procedures cannot be dredged, it will then automatically switch to the shutdown procedures to ensure the safety of personnel and equipment.
• Usually adopts stainless steel electric control panel equipped with world famous VFD, PLC, HMI and other electric components. According to user requirements, SHENZHOU can also provide VFD control panel with explosion-proof certificates home and abroad, such as China's CNEX explosion-proof, ATEX explosion-proof and IECEX explosion-proof.