| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This kind centrifuge is a separator for separating solid, liquid and liquid for chemical,oil, foodstuff, milk industry, daily industry and defense industry etc.. It has three types for solid discharge such as central value deslagging, artificial deslagging, and water push deslagging. The first type is mainly used in the desoponificating of oil refining, and the last two types are used in degumming and dehydrating, they are all applicable for liquid-liquid-solid and liquid-solid separation.
It has advantages of high speed, smooth operating, compact structure, small footprint, all sealed of the inlet and discharge, little noise, good separation.
Application
It is widely used in chemical, oil, foodstuff, milk industry, daily industry and defense industry such as:
1. Food stuff industry: For animal protein extraction and separation, as well as in meat processing for refining animal lipid or in concentrating and separating aquatic products of fish oil, in clarifying and degreasing milk, for the clarification of beer and malt, sparkling wine, fruit juice and drinks and so on.
2. Chemical industry: Mainly used in separating industrial chemicals, paint and coatings. Also it could be used in the clarification and purification of wastewater from light, textile, chemical fiber industry as well as analogues of greater density solid-phase. Also it is used for concentrating and clarifying of natural rubber, it separates rubber milk into concentrated latex and clear pastern. At the same time it removes the solid impurities in serum.
3. Oil industry: It can be used vegetable oil, animal fat, fish oil, soap oil, biodiesel and other lipid-foot, swill oil as raw material, through new centrifugal separation process of trans- esterification and access .
4. Other industry: It mainly used to remove the water and mechanical impurities contained in equipment fuel and lubricants in boating mainframe, diesel power station as well as other types of mineral oil, in order to reduce diesel engine or other mechanical wear and extend the useful life of the mechanical. Also applies to separate and clarify similar materials of waste oil in other petrochemical industries, such as black oil, delayed coking oil, washing oil and recycle oil and so on.
Biodiesel also is a typical "green energy", so develop the bio-diesel has an important strategic significance in continuable economic development, promote alternative energy, reduce environment pressure and control urban air pollution.
Centrifuge machine Standard design
The machine consists of a frame that has a horizontal drive shaft with clutch and brake, worm gear , lubricating oil bath and vertical bowl spindle in the lower part.
The bowl is mounted on top of the spindle in the lower part. The bowl is mounted on top of the spindle , inside the space formed by the upper parts of the frame , the ring solid cover, the collecting cover, and frame hood . The feed and liquid discharge system , including the paring disc pump for the heavy phase, also rests on this structure. All parts in contact with the process liquid are made of stainless steel. The bowl is of the solid-ejecting disc type with hydraulic operating system. The electric motor is of the variable frequency drive type or of controlled-torque type.
Basic equipment
Concentrator or purifier parts, inlet and outlet devices, revolution counter, set of erosion-protective parts ,illuminated sight glass box for light phase outlet , vibration switch , vibration-isolating base plate , flange motor, set of tool and standard set of spare.
Optional extras
Started equipment, frequency converter, discharge control panel, standard set of fittings, set of CIP valves and fittings and serviceability package for online viewing of separator status
|
Model |
Bowl Speed(rpm) |
Capacity(Per Hour) |
Running Load(Watts) |
Dimensions, Overall (mm) |
||
|
Width |
Front-to-Back |
Height |
||||
|
250 |
8500 |
500-800 |
4.0 |
850 |
850 |
1200 |
|
270 |
7300 |
1000 |
4.0 |
950 |
950 |
1200 |
|
300 |
7150 |
1500 |
5.5 |
1025 |
1300 |
1300 |
|
360 |
7056 |
2000-3000 |
7.5 |
1500 |
1100 |
1500 |
|
400 |
7038 |
3000 |
7.5 |
1500 |
1100 |
1550 |
|
500 |
6600 |
5000-8000 |
15.5 |
1772 |
1500 |
1855 |
|
550 |
6200 |
8000-15000 |
18.5 |
1970 |
1560 |
1970 |
|
730 |
4900 |
50000-80000 |
55.0 |
2580 |
1980 |
2340 |
Material data
Bowl body , hood and locking ring S.S304
Solids cover and frame hood S.S
Frame bottom parts green cast iron , cald with
In and outlet parts S.S
Gasket and o-ring Nitrile rubber
Operating principles
Separation takes place inside a rotating bowl. The feed is introduced to the rotating centrifuge bowl from the top via a stationary inlet pipe (1),and is accelerated in the distributor(2),which was specially designed to ensure smooth acceleration of the feed liquid(4). Leaving the distributor, the feed enters the disc stack(3). The separation into liquid-liquid-solid takes place between the discs, with the oil phase moving through the disc stack to the centre. When it reaches the centre, it is discharged through hole (5) and ejected into the collecting frame. The water and heavy solid separated from the oil move to the periphery, and the water flows via channels in the top disc(6) to the paring chamber, where it is pumped out of the rotor by means of a built-in paring disc(7).During purification, hot water is fed into the inlet of the bowl before the process liquid is introduced. The water forms a seal around the outer edge of the top disc. The solid collect in the periphery where they are discharged intermittently via the centrifuge cyclone. The solid are discharged by means of a hydraulic system, which forces the sliding bowl bottom(8)to drop down at preset suitable intervals, thus opening the solid ports at the bowl periphery
Disc separator types:
More details picture:
Others products:
Our service
){kind=link}