Palm Oil Horizontal Decanter Centrifuges Industrial Centrifuge for Oil Separation

• After-sales Service: Permanent Technical Support
• Warranty: 1 Years
• Type: Centrifuge
• Object: Liquid-Solid Separation
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Model NO.: LW
• Installation: Vertical
• Centrifuge Type: Horizontal Spiral Centrifuge
• Pressure: High Pressure
• Condition: New
• Authentication: CE/ISO/GMP/Atex
• Electronic Component: ABB or Siemens
• Bearing: S-K-F, NSK as Optional
• Transport Package: Wooden Case
• Specification: According to The Model
• Trademark: SHENZHOU
• Origin: China
• Production Capacity: 500pieces/Year

Product Description

Product Description

Features:

The decanter centrifuge can be adjusted to suit individual requirements by varying:
1. Decanter centrifuge bowl speed to ensure the exact relative centrifugal force required for optimized separation.
2. Decanter centrifuge differential speed, for optimized balance between liquid clarity and solids discharge capacity.
3. Decanter centrifuge pond depth in the bowl for optimized balance between liquid clarity and solid dryness.

Application:

Decanter centrifuge is widely used in industries as municipal and industrial waste water treatment, food processing,
pharmaceuticals and chemicals, etc.
1. Decanter centrifuge solid phase dehydration: dehydration effect for processing materials of solid particles.
2. Decanter centrifuge particle size classification: used in the removal of material of large diameter solid particles.
3. Decanter centrifuge liquid clarification: used for removing solid particles in the suspension liquid are clarified

Working Principle:

Decanter centrifuge separation takes place in a horizontal cylindrical bowl equipped with a scroll conveyor. The processing
material is fed into the bowl through a stationery inlet tube and is smoothly accelerated in the accelerate chamber. Centrifugal forces cause instant sedimentation of the solids on the wall of the bowl. The conveyor rotates in the same direction as the bowl, but at a different speed, thus moving the solids towards the conical end of the bowl.


Main technical features1. Industrial design

Whole machine set design follows concept of advanced industrial design,ensures stability,functionality and safety of whole machine.Also effectively absorbs shear force of dynamic load during operation.


2. Effectively ease resonance during rotating of bi-rotor

When centrifuge works,there is no obvious first-order and two-order resonance regions within designed speed range,meanwhile ,whole vibration intensity of bearing seat is definited within 2mm/s-4mm/s.All of this eliminates extra fatigue damage to components and assembly units from high frequency vibration during operation and sudden vibration when shut down.

3. Thoroughly eliminate phenomenon of liquid ring stalling

Phenomenon of liquid ring stalling happens during heavy duty boot or shutdown process of complete set machine,especially for LW550 and even larger models,It would makes bounce or wild shake,causes extra impact fatigue damage to main bearings,screw bearings and inner parts of rotary bowl.Fortunately ,our engineers have solved this problem thoroughly.
4. Unique technique adopt in main component work-blanks

The manufacturing methods of main component work-blanks are adopt centrifugal casting technique and overall mould-making forging technique,thoroughly avoid risks such as inter-granular corrosion and relaxation of residual stress release in welding joint.

5. Main bearing electrical components selection

We use origin bearings of international first-line brands such as S-K-F,F-A-G and so on.Electrical components mainly adopt ABB and Siemens

6. Constant temperature detection

All fashioning components and assembly units are detected in constant temperature condition,to make sure of actual processing quality meets the requirements of designed precision accuracy.

7. Inter-change ability

Whole machine physical design and processing technique adopted in critical position,ensure all assembly units and bowls of the same centrifuge model interchangeable.It is not only easy to maintain ,but also greatly improve the reliability and safety of equipment.

8. Simplyand safely in bearing disassemblement

One layer of oil film is injected into contact surfaces between bearing and work-piece by high-
pressure,during disassemblement bearing from the machine.which would fundamentally eliminate friction within different parts.As a result,it would reduce 90% of pulling force and lower the risk of damage to high-precision parts when disassemble bearing.
9.Main bearing lubrication system
There are two kinds of lubrication system for specific product models :
A thin oil lubrication
* Oil pump offers an uninterruptedly power to ensure oil works circularly;
* Jet oil lubrication constantly clean and lubricate bearings and reduce temperature;
* Oil filter system ensure lubricant's cleanliness;
* Oil pressure energy storage system ensure lubrication pump offers an extra oil supply(the pressure is no less than 0.4Mpa) for 5-6 minutes,when power fails accidentally;
* Constant temperature system is available.


B grease lubrication
* Adopt a grease with properties of extreme pressure resistance ,oxidation resistance ,abrasion resistance,water scour
resistance,corrosion-proof and high temperature resistance.
* Optional automatic grease system fills grease on main bearing at designed hours and quantity.

10. Main bearing BH device (patent design)

There are two spare safe bearings at either end of main bearing.When machine works well,they keep certain clearance from bearing inside track to chief axis.When unexpected condition occurs,main bearing got damaged or circle center deviation causing an amplitude of vibration reaches to designed clearance,safe bearings begin to work as main bearing Meanwhile,computer automatic control system would get a feedback of abnormal vibration value on bearing position immediately then activates emergency shutdown and goes a smooth shut down.This system protects machine free from damaging and ensure production safety.

11. GSRL feeding device (potent design)

New design of internal spiral core tube has got following achieves.Without reducing centrifugal acceleration,shorten triangle belt's traction time,reduce disorder of swirling flow and extend separation time.Meanwhile increases inner working pressure of centrifuge,and restrains liquid foaming.
 

Place of Origin:	Jiangsu, China	Type:	Centrifuge, Separating Plant
Product Type:	Other, Clarification Centrifuge	Condition:	New
Video outgoing-inspection pection:	Provided	Machinery Test Report:	Provided
Marketing Type:	Hot Product	Warranty of core coponents:	1 years
Core Components:	PLC, Bearing, Motor	Brand Name:	SHENZHOU
Voltage:	110V,220V,380V,440V,460V	Power:	Depend on model choosing
Weight:	Depend on model choosing	Dimension(L*W*H):	Depend on model choosing
Certification:	ISO,CE	Warranty:	1 Year,
After-sales Service Provided:	Field installation, commissioning and training, Field maintenanc	Key Selling Points:	Easy to Operate
Applicable Industries:	Manufacturing Plant, Machinery Repair Shops, Food & Beverag,Other	After Warranty Service:	Spare parts, Field maintenance and repair service
Product name:	decanter centrifuge	Bearing brand:	S-K-F, NSK as option