Shenzhou Olive Oil Decanter Centrifuge

• Customization: Available
• After-sales Service: 24 Hours on Line
• Warranty: 1 Year
• Model NO.: LWS
• Type: Centrifuge
• Object: Palm Oil
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Application: Liquid-Liquid-Solid Separation
• Operation: Automatic Continuous
• Bearing: SKF, NSK as Optional
• Motor: ABB
• Transport Package: Wooden Case
• Specification: material: stainless steel
• Trademark: Shenzhou
• Origin: China
• HS Code: 8421192000
• Production Capacity: 500sets/Year

Product Description

1. Gearbox
2. Wet husk outlet
3. Conical end
4. Screw conveyor
5. Bowl
6. Olive Oil outlet
7. Feed tube
8. Feed inlet
9. Oil discharge ports

olive oil decanter centrifuge operating principles

The olive oil decanter centrifuge design makes sure the incoming paste is effectively separated into oil and wet solids.

The olive paste is fed into the bowl of the unit through a stationary inlet tube, and is then smoothly accelerated by an inlet rotor. Separation takes place in a horizontal cylindrical bowl equipped with a screw conveyor. Centrifugal force makes the oil accumulate at the liquid surface, while the solids settle on the inner wall of the bowl, surrounded by the water separated out of the feed stream.

The conveyor rotates at a slightly different speed than the bowl and moves the solids to the discharge ports in the conical end. Olive oil extraction takes place along the entire length of the cylindrical part of the bowl. The oil is returned to the large end for discharge, and then passes into collecting tanks via a filter.

LWS plam oil centrifuge is suitable for plam oil dehydration and slag, after separating plam  oil reach national standard.

1. Main standard of the national machinery industry. 

JB/T502-2004 "spiral discharge sedimentation centrifuge"

JB/T9095-1995 "centrifuge, separator forgings, welding conventional NDT technology standard"

2. The national main standard

GB10894-89 "separation machinery noise sound power level measurement engineering method" 
 

Decanter centrifuges in the  range are equipped with a variable frequency drive (VFD) and are available with control solutions to comply with your specific operating requirements.

Plam oil centrifuge machines' structure:

1. drum;

2. screw pusher;

3. planetary gear differential;

4. base;

5. stainless steel cover; 

6. absorber; 

7. motor;

SHENZHOU decanter centrifuges can also be fitted with IoT equipment, to provide users and decision-makers with a wide range of operating data, whether onsite or off.

• Remote support enables your service provider to provide remote troubleshooting to help ensure maximum processing uptime and keep your Sigma unit or units running throughout the hectic olive processing season
• Remote monitoring ensures greater peace of mind. Access SHENZHOU´s connectivity portal to remotely monitor your decanter centrifuge and receive any appropriate alarm notifications

1.The integral design of the machine adopt international advanced type of structure design in recent years, m 

otor puts beside, cover flat on flame structure, it causes that the machine maintenance is more convenient, low

noise, small vibration, easy installation.    
2.Stainless steel cover adopts enclosed design, peculiar smell gas of the machine in the work is not be leaked.

It leads that the work environment satisfies the requirements.
3.Drum material adopts stainless steel 304. 
4.Vibration system adopts drum high modulus of elasticity of absorbing vibration damping device. Compared to

previous models, the machine vibration is greatly reduced.
5.Electrical control adopts double frequency automatic control system

6.The other main components adopt joint venture or wholly-owned or domestic famous brand products. 

Model	Diameter (mm)	Bowl Speed (rpm)	G-force	Capacity (m3/h)	Main Power(kw)	Weight(kg)	Overall Size(L × W × H)(mm)
LWS420	420	3300	2550	5~20	30/11	3610	3331 × 990 × 1066
LWS450	450	3300	2739	4~50	30/11	3655	4000 × 1120 × 1239
LWS500	500	3200	2860	5~45	55/11	4213	4489 × 1160 × 1350
LWS540	540	2800	2366	5~50	45/15	5290	4587 × 1285 × 1368

 

• Feed zone position that maximizes the time the oil spends inside the unit, and how much oil is extracted
• Special conveyor design that improves solids transport and maximizes oil recovery
• Special flights to prevent turbulence as the oil moves towards the liquid outlet, to optimize yield and oil clarification
• Surface level of olive oil outlets ensure minimal heating of the oil during separation, helping protect oil quality
• Special bowl design with easy oil discharge minimizes the quantity of oil held inside the bowl
• Fully protected feed zone, featuring a special design that improves resistance to wear
• 360° solids discharge outlets made of tungsten carbide, which provides exceptional protection against wear and keeps power consumption to a minimum
• Conveyor fitted with tungsten carbide tiles (standard on Sigma 8, 9 and 10; optional on Sigma 6) to provide wear protection that significantly reduces maintenance costs
• Conveyor parts subject to high wear are easy to replace
• Easy serviceability
• Cover is equipped with hinges and springs to make it easy and safe to open, clean and inspect the decanter

 

PS: The above parameters will be subject to the final technical agreement.

Disc centrifuge separator specially used for separate water and impurities from palm oil,get clear palm oil.



The disc separator or centrifuge is specially used for the 2 phase and 3 phase separation. The two phase separation is to separate the suspended solid from liquid or separate two liquids which have the different specific gravity and are immiscible. The three-phase separation is to separate the two immiscible liquid phases and a phase of soild at the same time .
 

 

OIL centrifuge  disc separator  is one of gravity separation equipment. This machine has  the features such as compact, high-efficiency separation smooth and steady in running, sealed material, reliable performance, and etc. It can realize full-automatic control and be widely used in the process of liquid-liquid separation, solid-solid separation, clarifying , concentraction, and etc.

This machine products are widely used in degum, de-soap and water washing in vegetable oil refinery. It can also be used for refining of animal oil and mineral oil, and liquid-liquid and liquid-soild separation of ligh industry, chemical industry, medicine and food industry.
 

Model	Bowl Speed(rpm)	Capacity(Per Hour)	Running Load(Watts)	Dimensions, Overall (mm)
				Width	Front-to-Back	Height
250	8500	500-800	4.0	850	850	1200
270	7300	1000	4.0	950	950	1200
300	7150	1500	5.5	1025	1300	1300
360	7056	2000-3000	7.5	1500	1100	1500
400	7038	3000	7.5	1500	1100	1550
500	6600	5000-8000	15.5	1772	1500	1855
550	6200	8000-15000	18.5	1970	1560	1970
730	4900	50000-80000	55.0	2580	1980	2340

Main function 

Vegetable oil: 

Colza Oil, Cottonseed oil, Corn oil, Palm oil , soybean oil, peanut oil, Rice oil, sesame oil, sunfloweroil and so one 

Animal oil: Fish oil, or other animal fat . 

Main Features

1) Easy in installation and maintation. 
2) Full-automatic vibration detector can monitor the vibration strength value of the centripetal pump at any time.

3) Include automatically alarm

4) With PLC control and LED touch screen

5) Heavy -phase centripetal pump adopts European advanced electric positioner control 
6) Running in high speed, operating stability,low noise

7) Stability outlet pressure, large regulating sphere and operating easily.

8) Self-discharging , self-cleaning

 

Our Services

The suggestions from our customers, and offers the all-day, all-directional and top-grade market services.
The technical and after-sale services are listed as follows:
1. Provide free technical training, guidance and information of accessories.
2. Our technical staff could instruct our customers on the installation of connector and accessories on site, and deal with technical and quality issues.
3. We guarantee more than 10 years' service life of our products with 1 years' warranty and life maintenance.
4. 24-hour hot line: 86-13674188053 . Once receive the customer complaints, we will response within 24 hours.
5. Free maintenance and replacement will be provided if defects result from quality failure of our product.
6. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.
7. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.
8. Our company will provide perfect after-sale services and technical support.