Lw450 Decanter Centrifuge for Palm Oil Production/Extraction

• Customization: Available
• After-sales Service: Service Has No Endpoint
• Warranty: 12monthes
• Model NO.: LW
• Type: Centrifuge
• Object: Solid Liquid or Liquid-Liquid or Liquid-Liquid
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Decanter Centrifuge
• Pressure: Medium Pressure
• Condition: New
• Material: SS304L or SS316L
• Machine Name: Lw Decanter Centrifuge for Sludge Dewatering
• Certification: GMP/CE/ISO
• After-Sales Service Provided: Field Installation, Commissioning and Training
• Transport Package: Wooden Cases
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: Zhejiang
• HS Code: 8421192000
• Production Capacity: 500sets
• Package Size: 130.00cm * 90.00cm * 160.00cm
• Package Gross Weight: 1050.000kg

Product Description

With the introduction of mandatory measures for the deadlines of sewage companies, the management of DDGS in the brewing industry has become a top priority for many manufacturers. At present, in the Cray treatment mode, the advantages and disadvantages of the separation of the solid and liquid of the wine grains play a very important role.

It is obviously not advisable to adopt backward methods such as natural sedimentation filtration and manual bag extrusion, which is not only because of the large area, labor, low efficiency, poor working environment, but also the quality is difficult to stabilize. Processing brings disadvantages. In addition, the decanter centrifuges commonly used in many factories also have large investment, bulky, high installation requirements, high power consumption during use, high noise, fast self-wearing, difficult to repair, high cost and other defects, forcing some manufacturers to have to Discard and use a cone basket centrifuge. However, the cone basket centrifuges currently used in various factories have a short filter life (average one shift needs to be replaced) and affect the continuity of its use. The more important formula is limited by the structure of the device itself. The filter mesh is limited to a nylon mesh cloth of about 100 mesh (the strength is worse if the mesh size is increased, and the service life is shorter), resulting in poor filtrate quality and an average suspended matter of 1.5%. In the above, the conformity of the subsequent processing is increased. In addition, the center of gravity of the cone basket centrifuge is high, the belt drive shaft is subjected to axial tension, the mechanical structure is easy to wear, the vibration and noise are large, and the bearing part needs to be cooled by water or oil due to heat during operation, and the maintenance and replacement of each component is frequent and difficult. These have also become defects in their actual use.

The new centrifuge for the separation of DDGS developed by RS separation is reasonable in structure and can be continuously produced. It is continuously updated in the actual operation of distiller's grains separation. It has been optimally configured for the separation of distiller's grains in structure and design, with less power consumption and fully automatic. Control, vibration and noise are better than the national standard, the liquid suspension after separation is less than 0.7%, and the moisture content of the filter cake is 75%. It has been widely used in the production line of the majority of alcohol manufacturers, and the treatment effect of the distiller's grains is remarkable.

Two phase centrifuge specification

Model	Technical parameter					motor power		outline dimension(mm)	Machine weight (KG)
	(Diameter)mm	Rotation speed rpm	Length mm	Separation factor G	capacity M3/h	Main motor KW	Vice motor KW	Dimension: L×D×H
LW250×1000	250	3600	1000	1813	1-3	7.5/11	4/5.5	2065×1050×800	1100
LW360×1200	360	3500	1200	2467	3-8	11/18.5	7.5/11	2600×1500×850	1900
LW360×1500	360	3500	1500	2062	3-8	11/18.5	7.5/11	2800×1400×850	2000
LW420×1750	420	3200	1750	2406	4-20	30/37	11/18.5	3120×1580×1050	3000
LW450×1600	450	3200	1600	2578	5-25	30/45	11/22	3780×1050×1180	3500
LW450×1800	450	3200	1800	2578	5-25	30/45	11/22	3985×1050×1180	3600
LW450×2000	450	3000	2000	2266	5─25	30/45	11/22	4320×1050×1180	3800
LW500×1800	500	3000	1800	2517	10-30	37/55	15/22	4200×1110×1200	4300
LW500×2100	500	3000	2100	2517	10-30	37/55	15/22	4500×1110×1200	4500
LW550×1800	550	3000	1800	2769	10-35	45/55	18.5/22	4380×1160×1230	4800
LW550×2200	550	2800	2200	2412	10-35	45/55	18.5/30	4780×1160×1230	5000
LW650×1750	650	2000	1750	1454	20-50	75/90	30/37	4576×1300×1250	6000
LW650×2000	650	2000	2000	1454	20-50	75/90	30/37	4900×1300×1250	6200
LW800×2000	800	1800	2000	1450	40-100	90/110	45/55	6052×1460×2100	10000
LW1000×2350	1000	1600	2350	1432	50-140	110/132	55/75	6850×1860×2300	12800

The advantages of our product

1. Industrial design
Whole machine set design follows concept of advanced industrial design,ensures stability,functionality and safety of whole machine.Also effectively absorbs shear force of dynamic load during operation.
 
 2. Effectively ease resonance during rotating of bi-rotor
When centrifuge works,there is no obvious first-order and two-order resonance regions within designed speed range,meanwhile ,whole vibration intensity of bearing seat is definited within 2mm/s-4mm/s.All of this eliminates extra fatigue damage to components and assembly units from high frequency vibration during operation and sudden vibration when shut down.
 
 3. Thoroughly eliminate phenomenon of liquid ring stalling
Phenomenon of liquid ring stalling happens during heavy duty boot or shutdown process of complete set machine,especially for LW550 and even larger models,It would makes bounce or wild shake,causes extra impact fatigue damage to main bearings,screw bearings and inner parts of rotary bowl.Fortunately ,our engineers have solved this problem thoroughly.

 4. Unique technique adopt in main component work-blanks 
The manufacturing methods of main component work-blanks are adopt centrifugal casting technique and overall mould-making forging technique,thoroughly avoid risks such as inter-granular corrosion and relaxation of residual stress release in welding joint.
 
 5. Main bearing electrical components selection
We use origin bearings of international first-line brands such as S-K-F,F-A-G and so on.Electrical components mainly adopt ABB and Siemens
 
 6. Constant temperature detection
All fashioning components and assembly units are detected in constant temperature condition,to make sure of actual processing quality meets the requirements of designed precision accuracy.
 
 7. Inter-change ability
Whole machine physical design and processing technique adopted in critical position,ensure all assembly units and bowls of the same centrifuge model interchangeable.It is not only easy to maintain ,but also greatly improve the reliability and safety of equipment.
 
 8. Simplyand safely in bearing disassemblement
One layer of oil film is injected into contact surfaces between bearing and work-piece by high-
pressure,during disassemblement bearing from the machine.which would fundamentally eliminate friction within different parts.As a result,it would reduce 90% of pulling force and lower the risk of damage to high-precision parts when disassemble bearing.

9.Main bearing lubrication system
There are two kinds of lubrication system for specific product models :
A thin oil lubrication
 * Oil pump offers an uninterruptedly power to ensure oil works circularly;
 * Jet oil lubrication constantly clean and lubricate bearings and reduce temperature;
 * Oil filter system ensure lubricant's cleanliness;
 * Oil pressure energy storage system ensure lubrication pump offers an extra oil supply(the pressure is no less than 0.4Mpa) for  5-6 minutes,when power fails accidentally;
 * Constant temperature system is available.
B grease lubrication
 * Adopt a grease with properties of extreme pressure resistance ,oxidation resistance ,abrasion resistance,water scour
   resistance,corrosion-proof and high temperature resistance.
 * Optional automatic grease system fills grease on main bearing at designed hours and quantity.

 10.  Main bearing BH device (patent design)
There are two spare safe bearings at either end of main bearing.When machine works well,they keep certain clearance from bearing inside track to chief axis.When unexpected condition occurs,main bearing got damaged or circle center deviation causing an amplitude of vibration reaches to designed clearance,safe bearings begin to work as main bearing Meanwhile,computer automatic control system would get a feedback of abnormal vibration value on bearing position immediately then activates emergency shutdown and goes a smooth shut down.This system protects machine free from damaging and ensure production safety.
 
 11.  GSRL feeding device (potent design)
New design of internal spiral core tube has got following achieves.Without reducing centrifugal acceleration,shorten triangle belt's traction time,reduce disorder of swirling flow and extend separation time.Meanwhile increases inner working pressure of centrifuge,and restrains liquid foaming

 

More parts show of the decanter centrifuge:

Productive process



Workshop

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.