Type: | Preparation Machinery |
---|---|
Finished Dosage Form: | Liquid |
Precision: | High Precision |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
High Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation.
HIGH SPEED TUBULAR CENTRIFUGE CLASSIFICATION
It is a high speed separator. It has better separation. The separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible mainshaft and the lower of it is damp floating. The mainshaft is connected with a driven wheel by the coupling seat with the buffer. The power is transmitted to the driven wheel by the motor through the transmission belt and the tensioner to make the bowl rotate around its axis at an overspeed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
GF model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.
Blood tubular separator is the improved one on the base of th original separator and through experinment again and again.GFXB tubular separator can be extensively used in separating blood plasma and cell of human being pig cow sheep and chicken etc.
GQ Working Principle
1. The centrifuge rotates at a high speed to reach a suitable working speed (the speed can be adjusted via the control panel), and the mixed suspension is continuously fed from the bottom, and the suspension are layered under the action of centrifugal force;
2. The density of the liquid in the suspension is relatively small, and it spirally rises gradually from bottom to top and then continuously discharges from the clear liquid outlet on the upper part of the rotor;
3.The solid phase is relatively heavier, and it will settle inside the bowl. After the solid is collected, turn off the centrifuge, and manually remove the rotor for slag cleaning;
4. After cleaning the slag, you need to reset the rotor installation, and then start the next separation process.
GF Working Principle
1.The centrifuge rotates at a high speed to reach a suitable working speed (the speed can be adjusted control panel), and the mixed suspension is continuously fed from the bottom, and the suspension are layered under the action of centrifugal force;
2.The two liquids in the suspension have a difference in density and are incompatible with each other. The liquid phase spirally rises gradually from bottom to top to the upper part of the rotor. The liquid phase with a smaller density is discharged from the light liquid outlet, and the liquid phase with a larger density is discharged from the heavy liquid outlet;
3.The solid phase density is the largest, and it will settle inside the bowl. After the solids are collected, turn off the centrifuge, and manually remove the rotor for slag cleaning;
4. After cleaning the slag, need to re-install the rotor, and then start the next separation process.
Model
|
GF/GQ75
|
GF/GQ105
|
GQ/GF125
|
GQ/GQ150
|
Diameter(mm)
|
75
|
105
|
125
|
147
|
Height (mm)
|
450
|
730
|
730
|
730
|
Sedimentation volume(L)
|
2.67
|
6
|
8
|
10
|
Max speed(r/min)
|
20000
|
16800
|
15800
|
14500
|
Max separation factor
|
21000
|
15300
|
16300
|
15600
|
Inlet nozzle diameter (mm)
|
3/4
|
4/6/8
|
4/6/8
|
4/6/8/10
|
Material inlet pressure (Mpa)
|
≥0.05
|
|||
Capacity (Water capacity)L
|
670
|
1600
|
2200
|
3200
|
Motor model
|
3 phase two pole motor
|
3 phase two pole motor
|
3 phase two pole motor
|
|
Motor power (kw)
|
1.5
|
2.2
|
3
|
3
|
Machine dimension (mm)
|
500*700*1300
|
600*1000*1600
|
600*1000*1600
|
600*1000*1600
|
Machine weight (kg)
|
260
|
490
|
510
|
550
|
Suppliers with verified business licenses