Disc Separator Waste Oil Filter Machine

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1 Year
• Model NO.: SZL
• Object: Oil
• Separation Mode: Centrifugal
• Operating Type: Continuous Type
• Installation: None
• Centrifuge Type: Disc Centrifuge
• Distillation Equipment Type: None
• Extraction Tower Type: None
• Pressure: None
• Condition: New
• Transport Package: Wood Case
• Trademark: SHENZHOU
• Origin: China
• Production Capacity: 500sets/Year

Product Description

Product Description

Disc separator waste oil filter machine

Fluid Disc Separator (Oil Purifier) SZL series produced by Shenzhou Group is a revolutionary technology product, which uses the centrifugal principle to purify various solid, liquid, gaseous (such as: water in oil, impurities, etc.) and other pollutants in the contaminated oil, to achieve rapid separation, and is at the leading level in the domestic industry products. Fluid Disc Separator (Oil Purifier) is improved on the basis of the original separator, and the purification speed and degassing effect are improved to an unprecedented degree in the field.

Disc separator waste oil filter machine

The control panel is equipped with pressure digital display meter to monitor the operating pressure of the equipment at all times;
The control panel is equipped with power supply, vibration protection, centrifugal cylinder motor, booster pump, oil return indicator, vacuum pump, phase sequence protection and other operating status indication information.

Fluid Disc Separator (Oil Purifier) is the use of centrifugal working principle. Using different material density of different characteristics, through the disc separation solid will particle with a density greater than the oil as well as water and air are separated from the oil. The specific working process is as follows: After the oil enters the oil pipe of the fluid disc separator from the customer's oil tank, under the action of negative pressure,it moves along the seal skeleton to the top of the centrifugal cylinder, and when it fills the entire cylinder cavity, the centrifugal cylinder begins to work. Under the action of centrifugal force, the oil rotates at a high speed to separate the dense particles and flow along the wall of the cylinder to the sewage container. At the same time, the oil that has just been preliminally purified is squeezed into the disc under the action of pressure, under the layer of filtration of the disc, the secondary purification is obtained, and the oil pipe is finally discharged, and the pressure is played back to the customer tank, and the water part will be thrown to the water removal hood by centrifugal force, so as to achieve online operation drainage. At this point, a filtering cycle is completed.

Technical Parameters

Functional Parameter	SZL-30P	SZL-40P	SZL-40G
Rated Flow	36-60L/min	36-60L/min	36-80L/min
Working Power Supply	Three-Phase Four-Wire System 380V
Frequency /Rated Power	50Hz/3KW	50Hz/3KW	50Hz/3KW
Environment Temperature	-20-80ºC	-20-80ºC	-20-80ºC
Environment Humidity	≤95%	≤95%	≤95%
Cylinder Speed	≥8000r/min	≥8000r/min	≥8000r/min
Protective System	Phase Sequence, Vibration protection, Soft Star	Phase Sequence, Pressure Relief, Vibration Protection, Soft Start
Oil Viscosity Range	25-320#CSt	25-460#CSt	25-680#CSt
Slag Removal NAS Grade	3-8	3-8	3-8
Drainage Efficiency		96.10%	99.98%
Drainage Method		Automatic Continuous Drainage	High-speed Automatic Continuous Drainage
Import oil Pressure	Vacuum Degree≤0.05Mpa	Vacuum Degree≤0.05Mpa	Vacuum Degree≤0.05Mpa
Max Output Pressure	≤0.40Mpa	≤0.40Mpa	≤0.40Mpa
Min Output Pressure	≥0.15Mpa	≥0.15Mpa	≥0.15Mpa
Imbibition Height	≤8m	≤8m	≤8m
Applicable Oil	Hydraulic Oil/Turbine Oil/Lubricating Oil/Gear Oil	Hydraulic oil/Turbine Oil/Lubricating Oil/Gear Oil/Oil Film Bearing Oil
Specification of Equipment	1015x622x943mm	1015x622x943mm	1015x622x943mm
Installation (unit) Weight	≤320KG	≤320KG

Selection Comparison Table

 

Functional Parameter	SZL-30P	SZL-40P	SZL-40G
Slag Removal Function	YES
Degasification	YES
Water Removal Function	NO	YES
Pollution Degree of Solid Particles	0	NAS 3-8
Slag Gas Separation Efficiency	99.0 %	99.7 %	99.97 %
Water Separation Efficiency	Low	Middle	High
Quantity of Flow	30-45L/min	45-60L/min
Viscosity Range	3-460mm²/s	3-680mm²/s
Phase Sequence Protection	YES
Vibration Protection	NO	YES
Pressure Relief Protection	NO	YES
Motor Type	Chinese Domestic Motor	ABB Motor
Rotate Speed	8000r/min		10000r/min
Versions	3.0	4.0

Application

SZL-30P model equipment is suitable for steel metallurgy, electric power, Marine and shipping, non-ferrous metals, chemical industry, shipbuilding and other kinds of hydraulic oil purification, hydraulic parts cleaning, steam turbine, hydraulic turbine, hydraulic tank cleaning and other large industrial and manufacturing applications.
SZL-40P and SZL-40G models are suitable for steel metallurgy, electric power, Marine and shipping, non-ferrous metals, chemical industry, shipbuilding and other kinds of hydraulic oil purification, hydraulic parts cleaning, hydraulic tank cleaning, turbine, turbine oil purification, wind power hydraulic system manufacturing and washing and other large industrial and manufacturing applications.

Technical Characteristics

Fluid Disc Separator (Oil Purifier) is a kind of high-quality purification equipment to ensure the normal operation of the hydraulic system. The working principle of its main application is to purify pollution particles, water and air quickly from the oil of the system. Fluid disc separator is a large viscosity, high water content of the oil purification has a strong pertinence, is used for hydraulic transmission system, servo system, various equipment lubrication system oil purification ideal equipment. The output flow rate of the fluid disc separator is not less than 36L/min, and the purification effect can reach NAS1638 3-8 level after purification if the purification mode is carried out, which fully meets the working requirements of the high-precision system.

Protection System

Pressure relief protection: When unexpected oil pressure failure or oil leakage occurs during the operation of the equipment beyond the set pressure value, the protection system will automatically cut off the power supply and stop the operation of the equipment.
Vibration protection: when abnormal vibration, jitter, resonance or decibel exceeds the value during the operation of the
equipment, the protection system will automatically cut off the power supply and the equipment will stop running.
Soft boot protection: When the device is started, this protection function will be enabled to avoid anomalies caused by
instantaneous high speed.