Fruit Juice Centrifuge Separator

• Customization: Available
• After-sales Service: Permanent Technical Support
• Warranty: 1 Years
• Model NO.: DHNZ
• Object: Clarification, Filtration, Concentration
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Condition: New
• Bearing: S-K-F, NSK as Optional
• Motor: ABB or Siemens
• Material: SS304/SS316L
• Transport Package: Wooden Case
• Specification: According to The Model
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 500sets/Year

Product Description

SPDH beverage disc separator is the most important equipment in food industry. Mainly used in the purifiedbeverage beer juice fruit wine coffe tea, and removal of foreign impurities in the beer. Similar materials can also be used for clarification and purification.

 This product absorbs the advantage of the same kind foreign product in Germany and Russia. All the parts  that may contact the feedstock are made of stainless steel. Availably reduce the chemical effect of the feedstock  and the machine spare parts.

  Power drive adopts the triction clutch, Transfer power by the fluid, start reliably, prevent overland. The bearings used

the machineare S-K-F grade in Sweden., guarantee working precision of the machine.

The separator adopts the PLC automatic control system,can carry out automatic de-slugging, ability of fitness is stronger, automatic degree is high. Easy to adjust, worker  labor strength is opposite to ease, the solids content ratio in the mixture fluid is widely.

When working,the sealing water 7 is bumped Into the sealing room 6,rising the sliding piston,and sediment ejection hole 3 is shutted down. then, Milk to be processed are fed to the bowl from feeding pipe 1, Under the effects of centrifugal force, the solids which has heavier  density is collectedon the bowl wall, After a while, the opening water 7 is bumped into the opening room 5, falling the sliding piston,open the sediment ejection hole 3, impurities are desluged from the bowl. The lighter liquid (mikl) flow along the inner side of the discs into the passage in the upper distributor,the lighter liquid is discharged from the machine by the centripetal pump2. Thus the milk is clarified well. The separator adopts self de-slugging and centripetal pump. Thus the machine can work continuously for a long time, attain good separation effects in long run.  
Features
* High speed centrifugation to remove oil grease and sludge impurities
* Strong emulsification ability
* Low energy consumption,saves money
* Full automation possible with PLC automatic control panel.
* Centrifugal separation requiring no filter media.
* High reliability drive train system backed by delivery of over 1,000 units a year.
* Bowl design with superior separation performance and with good response to discharge loads.
* Pilot valve regulates total/partial discharge of solids.
* Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid
* Fraction for discharge.
* Vibration-proof design realizes long working life.

Mainly technology data

 

Modle	DHN/Z204	DHN/Z360	DHN/Z400	DHN/Z470	DHN/Z500
Capacity	500-2000 L/H	2000-4000L/H	4000-5000L/H	5000-8000L/H	8000-10000 L/H
Discharge time and Interval	Discharge time can be adjusted from 0.1~0.9 second, and discharge time interval can be adjusted from 1~240 minutes according to the raw material
Motor Power	5.5KW	7.5KW	7.5KW	15KW	22KW
Turn on time	5~8minute
Stopped time (withoutbrake)	≤40minute
Input pressure	0~0.1mpa
Output pressure	0~0.3mpa
Working water pressure	0.2≤p≤0.45m pa
Noise	≤76dB
Max vibrate	1.5mm/
Weight	220kg	~550kg	~810kg	~1680kg	~2260kg
Dimension(mm)	830X610X600	1130x1050x1400	1500×1100×1400	1772×1473×1855

Packing & Delivery
1.Parking:standard wooden box

2.Spare parts :we supply some parts and accessories for free.

3.Electronic module:it is made up of electronic control cabinet.

4.Special tools:we supply a set special tools for free.



FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.