Product Description
Industry Pharmaceutical Corn Virgin Coconut Oil Latex Algae Pectin Blood Separation Tubular Centrifuge
Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has been widely used in pharmaceutical, health food, drinks, chemical industriesto separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.
There is two types:
GF-for separation: Heavy liquid forms outer ring and light liquid forms inner ring. They flow to the top of the bowl and discharge from their respective outlet. And the little solid is settled on the wall of the bowl and discharged manually after the machine stops.
GQ-for clarification: Heavy solid is deposited on the inner wall of the bowl,and forms the sludge. And it will be
discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl. It is mainly used for separating all kinds of suspension difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise. The high speed tubular centrifuge is mainly used in liquid-solid separation, liquid-liquid-solid separation in bio-pharmacy, beverage, chemical industry. It is an ideal separation equipment by centrifuging, especially for those feeding with little gravity difference, and small dimension in diameter.
Tubular Centrifuge separator features:
1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil, fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Product Paramenters
|
TYPE |
GQ75 |
GF75 |
GQ105 |
GF105 |
GF150 |
GQ150 |
GF125 |
GQ125 |
|
|
|
Inner diameter of bowl(mm)_ |
75 |
75 |
105 |
105 |
142 |
142 |
125 |
125 |
|
|
Efficient height of bowl |
450 |
450 |
730 |
730 |
730 |
730 |
730 |
730 |
|
|
Available volume of bowl |
2.67 |
2.67 |
6 |
6 |
10 |
10 |
8 |
8 |
|
|
The highest speed of bowl(R/min) |
21000 |
21000 |
19000 |
19000 |
15000 |
15000 |
16000 |
16000 |
|
|
The biggest separating factor |
22500 |
22500 |
21000 |
21000 |
16400 |
16400 |
18000 |
18000 |
|
|
The diameter of charging nozzle |
2,3,5 |
2,3,5 |
4,6,8, |
4,6,8, |
4,6,8,10 |
4,6,8,10 |
4,6,8,10 |
4,6,8,10 |
|
|
The pressure of charging inlet |
>0.05MPa |
>0.05MPa |
|
Capacity |
~400 |
~400 |
~1400 |
~1400 |
~2400 |
~2400 |
~2400 |
~2400 |
|
|
Motor |
1.5 |
1.5 |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
|
|
Dimenstion |
600×800
×1300 |
600×800
×1300 |
600×800
×1600 |
600×800
×1600 |
800×800
×1600 |
800×800
×1600 |
800×800
×1600 |
800×800
×1600 |
|
|
Machine weight(Kg) |
200 |
200 |
450 |
450 |
500 |
500 |
480 |
480 |
|
Tubular centrifuge separator Main Characteristics
Tubular centrifuge separator Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.
Tubular Centrifuge separator Application
Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
Company Profile
Liaoyang Shenzhou Machinery Equipment Co., Ltd. belongs to Shenzhou international Group. We are the professional manufacturer of Centrifuge & Separator, Liquid Filling Machine and packing machine. With many years producing experience, our factory have become leading manufacturer with professional technical team and Independent after-sale department.
Our international trade department can supply the whole project service. With many years development, we have known which factories have strong product with competitive price and we have built long-term and stable cooperation relationship with them. Our main area are the food and pharmacy project. Our successful project are coconut oil production line, liquid filling production line, packing production line and the tablet press production line, soft gelatin production line and so on. Our aim is providing you efficiently solution and superior after-service. We sincerely hope YOU are our next customers!
Exported country:
At present, our products have been exported to South Korea, India, Denmark, Russia, Georgia, Jordan, Bangladeshi, Tailand, Ethiopia, Finland, the United States, Canada, Australia, Spain, Japan, Colombia, Romania and so on more than 30 countries
FAQ
1. What certificates do you have?
We can provide CE, ISO 9001, etc
2. What is the warranty period of the equipment?
Normally 1 year warranty.
3. Can we visit your factory?
Of course, we sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by
telephone video conference.
4. What's payment you accept?
A4: T/T, Western Union, L/C, Ali Pay, etc
5. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
Our service
The technical and after-sale services are listed as follows:
1. Provide free technical training, guidance and information of accessories.
2. Our technical staff could instruct our customers on the installation of connector and accessories , and deal with technical and quality issues.
3. Our products with 1 years' warranty and life maintenance.
4. 24-hour hot line: 86-18941925296 . Once receive the customer complaints, we will response within 24 hours.
5. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.
6. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.
7. Our company will provide perfect after-sale services and technical support.
The technical and after-sale services are listed as follows:
Contact person: Cathy
Once receive the calling of complaints, we will respond to it within 12 hours at working time and provide solution within 48 hours. If necessary, our company will send technical staff there and provide on-site solution.
Audited Supplier 
){kind=link}