Lw500 Series Wastewater Sludge Dewatering Decanter Centrifuges

• After-sales Service: Permanent Technical Support
• Warranty: 1 Year Warranty for Equipment Spare Parts
• Type: Centrifuge
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LW
• Object: Solid Liquid Separation
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Pressure: Low Pressure
• Condition: New
• Material: SS304 or SS316 L or Ti
• Certification: GMP/CE/ISO
• Electronic Component: ABB or Siemens
• Bearing: S-K-F, NSK as Optional
• Transport Package: Wooden Cases
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 500sets
• Package Size: 1500.00cm * 800.00cm * 1200.00cm
• Package Gross Weight: 1000.000kg

Product Description

Sludge Decanter Centrifuges Features:
1. Designed with compact structure and pleasant appearance
2. With large processing volume and above 98% solid capture rate
3. Automatic control, which enables low operation intensity and reliable operation
4. With small space occupation, consecutive work and low noise level

Structure Theory
The imperforate drum was attached with a wood-cored discharge screw; the two simultaneously co-rotate at high speeds with certain speed difference, which is generated from the drive system and differential. The suspension enters the filling screw cavity through the feeding pipe, then, after accelerated, enters the drum. Under the centrifugal force, the solid-phase grain with larger density sediments to the drum inner wall, forming a dreg annular layer, which is continuously pushed towards the smaller side of the drum by the discharge screw, so as to discharged out of the drum, while the clarified fluids is continuously discharged out of the drum through the overflow port at the larger side, thus enabling the solid-liquid separation of the suspension.

LW500×2000 Sludge Dewatering Decanter Centrifuges Technical Parameters

Manufacturer	SHENZHOU Machinery  Co., Ltd
Model	LW500×2000(Forced Lubrication for Thin Oil)
Name	Unit	value	Remarks
Possessing capacity	T/h	7~11	To material properties, solid content may be
operating hours	h	24
Maximum drum rotational speed	r/min	3200(Nonadjustable)
Maximum relative centrifugal force	G	3150 (Nonadjustable)
Drum internal diameter (larger side)	mm	550
Aspect ratio		1:4
Type of solid outlet of the drum		360° Discharge port
Type of screw pusher		Right structure
Type of screw centrifugal tube discharge		Circular arc discharging port
Screw blade scraper(wear resistant)		Tungsten carbide
Type of differential mechanism		Planetary gear
Bearing lubrication structure		Forced Lubrication for Thin Oil
Lubrication system		Thin Oil Lubrication Station System	Qidong smelter
Differential rotation rate	Rpm	5~50(Nonadjustable)
Differential speed regulation precision	Rpm	≤0.1
Screw torque	Nm	≥10000
Drum		AISI304 stainless steel
Screw blades		AISI304 stainless steel
Hood		AISI304 stainless steel
Fastener		AISI304 stainless steel
Frame		Carbon steel coated with anticorrosion primer and finish
Sealing member	import	TTO NBR
Bearing NSK	import	Original Japanese product
Belt	import	Samsung, South Korea
Noise	dB(A)	≤85 At 1m from the unit
Vibration intensity	mm/s	≤6
Rated voltage	V	380
Level of protection	IP	44
Insulation class	F	F
Flushing water		Tap water, reuse water
Time	min	If the centrifuge is expected to keep from use for long, back flush it before shutdown 20-30min
Pressure of flushing water	MPa	0.3
Design Life		>20 year
Form of control		Dual frequency conversion control
Cabinet dimension		2000×800×600
Type of housing		Vertical control cabinet
material		Carbon steel sprayed with anticorrosion
Colour		RAL7032
Level of protection	IP	44

 

LW500×2000 Sludge Dewatering Decanter Centrifuges Schedule of Basic Materials

Manufacturer	SHENZHOU  Machinery  Co., Ltd
Model	LW500×2000(Forced Lubrication for Thin Oil)
Name	Wall thickness	Remarks
Drum	20mm	304 Stainless steel(Tisco)
Screw	20mm	304 Stainless steel seamless pipe(Tisco)
blade	8mm	304 Stainless steel(Tisco)
	Blade pusher surface: Ni-based alloy powder(Haystellite 1) anti-wear treated
Outer shroud	4mm	304 Stainless steel(Tisco)
Frame	400×200×10 Rectangular steel	Q235-A Carbon steel(Wuxi Yulong)
Bearing seat		QT400-15(Nodular cast iron)
Bearing		NSK(Original Japanese produc)
Electromotor	45KW 22KW(Diode motor)	Geshi Holding Co., Ltd
Frequency converter	SPF-45K SPF-22K	High performance general-purpose converter made by Taiwan Shihlin company
All materials and materials used in contact with the material: 304 (corrosion-resistant stainless steel), rectangular steel welded frame, machine warranty for 1 year, life-long maintenance services.

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.