High Quality Hr Pusher Centrifuge

• Customization: Available
• After-sales Service: Permanent Technical Support
• Warranty: 1 Year
• Model NO.: HR
• Type: Centrifuge
• Object: Liquid-Solid Separation.
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Pushing Material Filtration Centrifuge
• Pressure: Medium Pressure
• Condition: New
• Material: SS304 or SS316 or Anti-Corrosion Materials
• Electronic Component: a-B-B
• Bearing: F-a-G
• Authentication: ISO/CE/GMP
• Transport Package: Wooden Case
• Specification: Based on model
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 1000/Year
• Package Size: 2400.00cm * 1850.00cm * 2000.00cm
• Package Gross Weight: 3000.000kg

Product Description

Product Description

The HR series piston push centrifuge is a filtration centrifuge with continuous feeding and intermittent discharge.

 

It is mainly composed of hydraulic system, feeding mechanism, machine base, casing, transmission, drum and other components, and can achieve continuous feeding, separation, washing, unloading and other processes at full speed operation.

Applications:
Solid particle size>0.08mm, concentration 40% -80% (mass percentage), material viscosity suitable for chemical, fertilizer, alkali, salt and other industries, such as sodium chloride, ammonium chloride, ammonium bicarbonate, urea, polyethylene, polypropylene, ammonium nitrate, oxalic acid, sodium sulfate, caffeine, etc.

Working principle

The main motor drives the transmission device to run at full speed, and the material is introduced into the inner drum through the feed pipe. Under the action of centrifugal force, it is evenly distributed on the filter screen wall of the inner drum. The liquid phase material flows into the discharge pipe through the filter screen and the drum wall hole, while the solid phase material is intercepted by the filter screen and forms a filter cake layer inside the inner drum. The inner and outer drums rotate at the same speed under the push of the piston, and the inner drum continuously moves back and forth axially. Under the push of the feeding disc, the material is discharged from the inner drum into the outer drum for further separation and formation of an annular filter cake layer. Under the reciprocating push of the outer end face of the inner drum, it is intermittently discharged from the outer drum and discharged outside the machine through the scraper groove.


Product Features

1: Fully automatic continuous operation completes processes such as feeding, separation and washing, drying, and unloading. No manual intervention is required for the operation.

2: Can be customized according to different materials. Choose tubular feeding or spiral feeding. The scope of applicable materials is wider.

3: High yield, high recovery rate, low moisture content in filter cake, and low energy consumption.

4:The broken crystal particles are small and the filter cake can be washed.

5: The number of pushing times can be adjusted to better adapt to the needs of process changes.

6: Parameters can be optimized for specific situations to better meet user needs.

 

Product Parameters

Model	HR300	HR400	HR420-N	HR500-N	HR530-N	HR630-N	HR800-N	HR1000-N
Drum inner diameter	290/360	337/400	357/420	438/500	468/530	560/630	720/800	920/1000
Filter area length	180/180	160/160	160/160	180/180	180/180	240/240	300/300	360/360
Drum speed	1500-2500	1500-2500	1500-2500	1200-2000	1200-2000	1000-1900	800-1500	650-1250
separating factor	503-1400	503-1400	503-1400	402-1120	402-1120	350-1274	286-1145	236-875
Pushing stroke	50	40	40	50	50	50	50	50
Number of pushes	30-90	30-90	30-180	30-80	30-80	40-80	20-108	20-70
Main motor power	11	7.5-22	7.5-22	30-45	30-45	37-75	45-110	75-90
Oil pump motor power	5.5	4-7.5	4-7.5	15-22	15-30	15-30	22-45	45
production capacity	2-4	2-6	2-9	10-20	10-24	15-40	20-50	18-50

 

Company Profile

FAQ

Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.