| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GDF-260 algae separator is the most important equipment in algae industry. Mainly used in purifying algae from fresh water and sea water. Similar materials can also be used for clarification and purification.
This product absorbs the advantage of the same kind foreign product in Germany and Russia. All the parts that may contact the feedstock are made of stainless steel. Availably reduce the chemical effect of the feedstock and the machine spare parts.
Power drive adopts the inverter, start reliably, prevent overland.
The separator adopts the PLC automatic control system, can carry out automatic de-slugging, ability of fitness is stronger, automatic degree is high. Easy to adjust, worker labor strength is opposite to ease, the solids content ratio in the mixture fluid is widely.
When working, the sealing water 7 is bumped Into the sealing room 6,rising the sliding piston 4, and sediment ejection hole 3 is shutted down. then, beverage to be processed are fed to the bowl from feeding pipe 1, Under
the effects of centrifugal force, the solids which has heavier density is collectedon the bowl wall, After a while, the opening water 7 is bumped into the opening room 5, falling the sliding piston 4,open the sediment ejection hole 3, impurities are desluged from the bowl. The lighter liquid flow along the inner side of the discs into the passage in the upper distributor,the lighter liquid is discharged from the machine by the centripetal pump2. Thus the beverage is clarified well. The separator adopts self de-slugging and centripetal pump. Thus the machine can work continuously for a long time, attain good separation effects in long run.
.
The bowl will be driven by the main motor by the friction clutch and screw gear pair to rotate highly around the main shaft. Stock liquid flows from the center charging inlet on the top to the bottom through the charging pipe. And then passes through disc seats to the bowl's space. The bigger gravity solid phase particles in the stock liquid is settled down to the bowl's wall by the centrifugal force and then under the control of the side bowl drained out of the residue outlet but liquid phase is fully settled down to the bowl wall by the centrifugal force field and then under the control of the side bowl it is drained out of the residue outlet but liquid phase is fully settled down to the center along the discs to drain out by the centripetal pump.
Function of juice disc separator
the disc centrifuge separates solids and one or two liquid phases from each other in one single continuous process, using extremely high centrifugal forces. When the denser solids are subjected to such forces, they are forced outwards against the rotating bowl wall, while the less dense liquid phases form concentric inner layers. The area where these two different liquid phases meet is called the interface position.
This can be easily varied in order to ensure that the separation takes place with maximum efficiency. Inserting special plates (the "disc stack") provides additional surface settling area, which contributes to speeding up the separation process dramatically. It is the particular configuration, shape and design of these plates that make it possible for a disc stack centrifuge to undertake the continuous separation of a wide range of different solids from either one or two liquids. The concentrated solids phase formed by the particles can be removed continuously, intermittently or manually, depending on centrifuge type and the amount of solids involved in the specific application.
Product parameters of juice disc separator
| Model |
Water flow (L/h) |
Basket Diameter (mm) | Rotation Rate of Drum (r/m) | Separation factor | Power (KW) |
Slag discharge way |
Weight (kg) |
Dimension (mm*mm*mm) |
| SPDH2 60 |
2000 | 270 | 7450 | 6950 | 4 | automatic | 550 | 865*645*1100 |
| SPDH315 | 3000 | 315 | 7000 | 7000 | 5.5 | automatic | 650 | 900*600*1150 |
| SPDH385 | 4000 | 385 | 7000 | 7500 | 7.5 | automatic | 750 | 1100*1050*1250 |
| SPDH430 | 5000 | 430 | 7110 | 10000 | 11 | automatic | 900 | 1200*950*1400 |
| SPDH470 | 8000 | 470 | 6200 | 9500 | 18.5 | automatic | 1100 | 1250*1000*1550 |
Q1.What's your advantage? Why we choose you?
A:1)Great production capacity Sustainable Supply . According to customer requirements, We support the customized include package.
2)We use famouse good quality materials and the best production process.
Q2.What's the Payment?
A:T/T would be better with quick transfer and few bank fees. LC could also be accept, but the
procedure is complex and the fee is high. You can also use Western Union and Paypal.
Q3.Are you a factory or trading company?
A:We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q4.How long is the warranty period ?
A:12 months.
){kind=link}