Full Auto Virgin Coconut Oil Extration Tubular Centrifuge Industrial Tubular Centrifuge High Speed Tubular Bowl Centrifuge

• Customization: Available
• After-sales Service: Video Online Support
• Warranty: 1 Year
• Model NO.: GF/GQ
• Type: Centrifuge
• Object: Liquid-Solid or Liquid-Liquid-Solid
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Extraction Tower Type: Turntable Tower
• Pressure: Low Pressure
• Condition: New
• Material: Stainless Steel 304/316
• Voltage: 220V 380V 480V or Customization
• Key Selling Points: Easy to Operate
• Discharing Way: Manual Discharge Tubular
• Capacity: 200-3200L/H
• Transport Package: Depending on The Type
• Specification: 200-600kg
• Trademark: Reyes
• Origin: China

Product Description

Product Description

Full Auto  Virgin coconut oil extration tubular centrifuge industrial tubular centrifuge high speed tubular bowl centrifuge

GQ Liquid - Solid  Separation type

GF Liquid -Liquid - Solid Separation type

Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has been widely used in pharmaceutical, health food, drinks, chemical industriesto separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.

There is two types, for GQ tubular centrifuge which is used for the clarification.

 

The separator parts which contact with the materials are made of stainless steel. The machine body is iron casted which could be covered with stainless steel or coated with paintings according to the requirement of the customer.

 

Tubular centrifuge separator Working principle of GQ:

It is a high-speed centrifuge with strong separating capacity. The liquid mixture is fed through the feeding pipe in the bottom of the separator, the bowl of the centrifuge is driven by the motor via spindle and rotates around its axis at a very high speed and forms a strong centrifugal force and this centrifugal force separates the liquid mixture into liquid and solid according to their different gravities. The liquid is drain out from  respective liquid outlets on the top of the separator, in the meantime, the solids are deposited on the bowl's wall. When the accumulated solids full of the separator bowl, there will be no liquids drain out from the liquid outlets, the separator shall be stopped to remove the solid from the bowl manually.

Tubular Centrifuge separator features:
1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the machine stop.

2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil, fuel oil, turbine oil, grease, dyes, and saponification separation and so on.

3.Simple structure in linear type ,easy in installation and maintation.

4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.

5.Running in a high automatization and intellectualization,no pollution

6.Simple to set up, use and clean for minimal down-time between separations

7. No replacement membranes or costly disposables

8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.
Product Paramenters

TYPE		GQ75		GF75	GQ105	GF105	GF150	GQ150	GF125	GQ125
	Inner diameter of bowl(mm)_		75	75	105	105	142	142	125	125
	Efficient height of bowl		450	450	730	730	730	730	730	730
	Available volume of bowl		2.67	2.67	6	6	10	10	8	8
	The highest speed of bowl(R/min)		21000	21000	19000	19000	15000	15000	16000	16000
	The biggest separating factor		22500	22500	21000	21000	16400	16400	18000	18000
The diameter of charging nozzle		2,3,5		2,3,5	4,6,8,	4,6,8,	4,6,8,10	4,6,8,10	4,6,8,10	4,6,8,10
The pressure of charging inlet		>0.05MPa								>0.05MPa
Capacity		~400		~400	~1400	~1400	~2400	~2400	~2400	~2400
Motor		1.5		1.5	3.0	3.0	3.0	3.0	3.0	3.0
Dimenstion		600×800 ×1300		600×800 ×1300	600×800 ×1600	600×800 ×1600	800×800 ×1600	800×800 ×1600	800×800 ×1600	800×800 ×1600
Machine weight(Kg)		200		200	450	450	500	500	480	480

Tubular centrifuge separator Main Characteristics

Tubular centrifuge separator Details Images
Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.
Tubular Centrifuge separator Application
Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.

Company Profile

We are the professional manufacturer of Centrifuge & Separator, Liquid Filling Machine and packing machine. With many years producing experience, our factory have become leading manufacturer with professional technical team and Independent after-sale department.

Our international trade department can supply the whole project service. With many years development, we have known which factories have strong product with competitive price and we have built long-term and stable cooperation relationship with them. Our main area are the food and pharmacy project. Our successful project are coconut oil production line, liquid filling production line, packing production line and the tablet press production line, soft gelatin production line and so on. Our aim is providing you efficiently solution and superior after-service. We sincerely hope YOU are our next customers!

Exported country:
At present, our products have been exported to South Korea, India, Denmark, Russia, Georgia, Jordan, Bangladeshi, Tailand, Ethiopia, Finland, the United States, Canada, Australia, Spain, Japan, Colombia, Romania and so on more than 30 countries

FAQ
1. What certificates do you have?
We can provide CE, ISO 9001, etc

2. What is the warranty period of the equipment?
Normally 1 year warranty.

3. Can we visit your factory?
Of course, we sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by
telephone video conference.

4. What's payment you accept?
A4: T/T, Western Union, L/C, Ali Pay, etc

5. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
Our service

The technical and after-sale services are listed as follows:

1. Provide free technical training, guidance and information of accessories.

2. Our technical staff could instruct our customers on the installation of connector and accessories , and deal with technical and quality issues.

3. Our products with 1 years' warranty and life maintenance.

4. 24-hour hot line: 86-18941925296 . Once receive the customer complaints, we will response within 24 hours.

5. Our company will provide technical services by phone, fax, e-mail, etc., please refer to the contact details.

6. Our company will implement the contract strictly; deliver the products to location specified by our customers for free in accordance with the mode of transportation.

7. Our company will provide perfect after-sale services and technical support. 
The technical and after-sale services are listed as follows:

Contact person: Cathy
Once receive the calling of complaints, we will respond to it within 12 hours at working time and provide solution within 48 hours. If necessary, our company will send technical staff there and provide on-site solution.