| Customization: | Available |
|---|---|
| After-sales Service: | Field Installation, Commissioning and Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Spray drying is the most wide applied process in liquid process shaping and drying industry.The drying technology is most suitable for producing solid powder or practical products from liquid material,such as :solution,emulsion,suspension and pumpable paste states.For this reason,the particle size and distribution of the final products,residual water contents,mass density and the particle shape must meet the precise standard,spray drying is one of the most desired technologies.
Main Principle:
After air gets filtered and heated,it enters into an air distributor on the top of the dryer.The hot air enters into the drying room in a uniformly spiral form.Passing through the high speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Through a very short time of contacting the hot air,materials get dried.The final products discharge continuously from the bottom of the drying tower and from the cyclones.The waste gas will be discharged from blower.
High drying speed atomizes material into liquid,the surface of the material increase greatly.It only takes few seconds to evaporate 95-98% water in a hot air flow.This is especially suitable for drying the heat sensitive materials.
The final product has features of good uniformity,flow ability,and solubility.It is in a high purity and quality as well.
The production procedure is simple,operation and control are easy.For material contains 40-60% water(special material can contain more than 90%),it can be dried into powder or particles once a time.After the drying process,there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,losseness and water contents can be adjusted through changing the operation condition whining a certain range.It is very convenient to carry out control and management.
Nowadays, Changzhou Jiasheng Machinery Co.,Ltd have customers both in China and abroad.Foreign customers such as Russian,East Europe,Middle East,South America,North America,East Asia,Southeast Asia, Africa,etc.
|
Item Model
|
LPG-5
|
LPG-25
|
LPG-50
|
LPG-150
|
LPG-200~2000
|
|
Inlet temp. ºC
|
140~350
|
140~350
|
140~350
|
140~350
|
140~350
|
|
Outlet temp. ºC
|
80~90
|
80~90
|
80~90
|
80~90
|
80~90
|
|
Max. water evaporation kg/h
|
5
|
25
|
50
|
150
|
200~2000
|
|
Transmission form of
centrifugal atomizer
|
Compressed air transmission
|
Mechanical transmission
|
Mechanical transmission
|
Mechanical transmission
|
Mechanical transmission
|
|
Maximum speed (r.p.m)
|
25000
|
18000
|
18000
|
15000
|
8000-15000
|
|
Diameter of atomizer (mm)
|
50
|
120
|
120
|
150
|
180-240
|
|
Heat source
|
Electricity
|
Electricity, steam, natural gas, LPG
|
|||
|
Max. power of electric heater (kw)
|
9
|
36
|
72
|
99
|
|
|
Overall dimensions (LWH) (m)
|
1.8*0.93*2.2
|
3*2.7*4.26
|
3.5*3.5*4.8
|
5.5*4*7
|
|
|
Dry powder recovery rate (%)
|
≥95%
|
||||
|
Note: The amount of water evaporation is related to the characteristics of the material and the temperature of the hot inlet and outlet.
|
|||||
Spray drying is a more widely used process in the liquid process shaping and drying industry. It is especially suitable for generating powdery and granular solid products from solutions, emulsions, suspensions and pasty liquid materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product should meet the standards, spray drying is an ideal process.
1. who are we?
We are based in Liaoning, China, start from 1980 sell to South America(12.00%),Southeast Asia(10.00%),Northern Europe(10.00%),Southern Europe(10.00%),Domestic Market(10.00%),South Asia(8.00%),Central America(6.00%),North America(5.00%),Eastern Europe(5.00%),Africa(5.00%),Oceania(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Mid East(4.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Centrifuge,Separator,Packing machine,Drying machine,Filling & Sealing machine
4. why should you buy from us not from other suppliers?
We have a well-experienced team to manufacture pharmaceutical machinery and equipment and a professional design institute. With rich experience in pharmaceutical machinery and equipment field and numbers of professional engineers.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Italian
){kind=link}