Kydh Series Continuous Flow Centrifuge Waste Motor Oil Centrifuge

• Customization: Available
• After-sales Service: Always Serve
• Warranty: 1 Year
• Model NO.: KYDH
• Type: Separating Plant
• Object: Liquid-Solid or Liquid-Liquid Separation
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Function: Centrifuge Separator
• Transport Package: Wooden Case
• Specification: Material: Stainless steel
• Trademark: SHENZHOU
• Origin: China
• HS Code: 8421192000
• Production Capacity: 5000sets/Year

Product Description

1.Introduction                                                                                                                 

KYDH separator are mainly applied in the purification and clarification of the diesel, 

light fuel oil, heavy fuel oil and other mineral oil.used to remove the water, moisture, mechanical 

impurities and some harmful substances of the oil.This model are automatic slagging type, high

 separation efficiency, no need to disassemble to slagging.Can be automatic controlled according 

to to requirements which greatly reduce the labor intensity of the operating.This machine by the

 accurate calibration balancing, little vibration,can be long-running and operated safety and reliable.

2.Technical parameter                                                                                                             

Rated Capacity:6000 L/h(No.0light diesel oil)

Drum diameter:430mm

Power:11kW 

Drum Speed:6000 r/min

Discharge:automatic discharging ;

Pump pressure:≥0.2MPa 

Vibration speed:≤4.5 mm/s

Noise level:≤90 dB(A) 

Weight:~1000 kg 

Size(L*W*H):1152mmX880mmX1400mm            

Separation temperature of heavy fuel oil:95~98°C

3.Separation conditions and actual productivity of mineral oil                   

 

Item

Fuel oil

Lube oil

Distillate Fuel Oil

residual fuel oil

brandedoil

purified oil

Steam turbine oil

kinematicviscosity/(mm^2/s)

1.9~5.5

5.5~24

60

80

120

180

380

460

600

100~120

61.2~74.8

40°C

50°C

40°C

40°C

Density/ (kg/mm3)(20°C)

<900

900~991

880~900

<900

separation temperature/°C

20

40

75

80

90

98

80

75

The ratio of actual productivity and rated capacity %

130

100

70~75

60~65

55~60

45~50

35~40

25~30

20~25

50~60

25~30

80~85

Note:the ratio of actual productivity and rated capacity is 100%

4.Structures                                                                                                         

Main parts 1. Access device 2.drum  3.paring disc device 4.drive system 5.stainless steel cover 

6.engine base 7.Motor

(1).Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly,

 low noise and vibration, the installation path is very easy to operate.

(2)The main strengthen parts of Roller body and Roller cover use 2Cr13,and the other parts of 

contacted materials such as Disc all use 316L

(3)The Stainless steel cover use SUS304

(4)The base use casting steel, coating does the same way as ship bottom.

Technical Parameter:

No.	Model	Capacity (l/h)	Drum  diameter (mm)	Drum  speed	Motor  Power (KW)	Discharge  way	Separator  factor	Weight (kg)	Size (mm*mm*mm)
1	KYDR203CD-23	1500	230	6930	2.2	Manual	6170	245	850*625*985
2	KYDH204SD-23	2000	270	7200	4	Automatic	6950	550	865*645*1100
3	KYDH206SD-23	3000	315	6500	5.5	Automatic	7000	650	900*600*1150
4	KYDH207SD-23	4000	385	6500	7.5	Automatic	7500	750	1100*1050*1250
5	KYDH209SD-23	5000	430	6000	11	Automatic	8050	900	1200*950*1400
6	KYDH211SD-23	10000	500	5500	18.5	automatic	8000	1200	1250*1000*1550

 

6.Product guarantee                                                                                           

1.one year warranty. Except natural or man-made wear and tear.

2.Providing life-long service, after warranty period, charges are reckoned by cost

 

7.Equipment outlook figure:      

   

speed can be achieved at present. The higher rotating speed, the better 

separation effect.

8.Packaging & Shipping                                                                                        The parts are bolted to the wooden cases. with layers of plastic and standard wooden cases for packaging, it provide safe and convenient shippings.

                                                                        

FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you ASAP.
Q2: How can I make sure your machinery is suitable for me? 
A2: Please tell all the separation information you know, such as your raw liquid,
two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.