Small Lab Use High Speed Continuous Decanter Centrifuge for Test

• Customization: Available
• Type: Centrifuge
• Separation Mode: Filter Type
• Model NO.: LW150
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Pressure: Low Pressure
• Condition: New
• Material: 304/316L Stainless Steel
• Product Name: Decanter Centrifuge
• Max.Capacity: 500L/H
• Certification: GMP/CE
• Transport Package: Wooden Case
• Specification: 1150*750*650mm
• Trademark: Shenzhou
• Origin: China

Product Description

Product Description

Small Lab Use High Speed Continuous Decanter Centrifuge for test


The equipment provided by Shenzhou Centrifuge Co., Ltd. is a new, advanced, mature, complete,
safe and reliable equipment, and its technical performance meets the requirements in the technical accessories.

 

Horizontal screw centrifuge are better than the standard of JB/T502-2004 "Screw Discharge Settling
Centrifuge", and this product has passed the ISO9001-2000 quality system certification.

Laboratory Lab decanter centrifuge were developed specifically as two-phase decanter centrifuges for use in laboratories and pilot plants to enable small quantities of products to be processed at rates of between 1L/h to 200L/h in a continuous separation operation. The maximum throughput or feed rate depends on the separation characteristics of the specific products.

 

The minimum throughputs of industrial decanter centrifuges are generally far greater than the throughputs required for the quantities of products available in research laboratories. In the past, the processing stage of continuous separation therefore frequently had to be simulated with alternative batch-wise separation methods.

 

The laboratory decanters are used for solid-liquid separation, their principal application being the separation of liquid-based suspensions of organic and inorganic solids.


Advantage:
1. Universal settling centrifuge
2. Quick disassembling within 30 minutes
3. Minimal material residue, screw and drum clearance less than 0.3mm
4. Simple and straightforward control panel and operation
5. Compact design

Product parameter

Machine length:	1260mm
Machine width:	1250mm
Machine height:	650mm
Weight :	380kg
Diameter :	150mm
R/D:	4.33
Design speed:	6000r/min
Working speed:	5000r/min
Separation factor	2621
Differential speed:	0.1~30r/min Stepless adjustable
Main motor:	4kW (380V/3/50HZ)YE2-112M-2
Auxiliary motor :	1.5kW(380V/3/50HZ) YE2-90S-2
Motor protection level:	IP54
Motor insulation class:	E
No-load vibration intensity:	≤4.5mm/s

The working principle of horizontal screw centrifuge is very simple. It has been known by the public for a century. The drum and screw are supported by separate suspension.The material enters through the inlet pipe and accelerates into the core drum body through the drum.

 

Separation process:
The core consists of a cylindrical and conical rotating drum, and the centrifuge forces the solid material to deposit on the drum wall.

Solid discharge:
The helix has the same shape and Angle as the drum, rotating at a slightly faster speed than the drum, so that the separated solids are pushed towards the end of the narrow cone and expelled from the drum.The degree of dehydration of solids depends on many factors, in addition to the reason of the material itself, but also depends on the length of the separation of solids in the centrifuge, as well as the Angle of the tight rotation of solids, in addition to the screw and drum speed difference is also an important factor.

Drainage:
A chuck is installed at the bottom of the drum to adjust the depth of liquid level. The clarified liquid flows to the bottom along the spiral cylinder, and then is collected in the drain bucket to discharge the machine. The depth of the clarified liquid in the drum can be adjusted by changing different baffles.

 

Structure:
All the HY series of centrifuge on the basis of the compact design and simple operation to ensure the machine function and fully meet user requirements, the number of components including assembling the required equipment is kept to a minimum, so as to ensure the product assembly so need time is greatly reduced, further remove the assembly also need only 30 minutes, due to HY series
centrifuge operation is simple, for the use of a centrifuge also greatly reduce the training time, just daily centrifuge the maintenance.

Detailed Pictures

APPICATION

Horizontal mini decanter centrifuge is usually used in the food fermentation industry, fine chemical, pharmaceutical and biotechnology industries. Except the research and development department, HY series of centrifuges should also be used to produce high quality products with flow rate less than 200L/H. HYseries can also be used as measuring instruments to record the two-phase flow characteristics of the test products and the torque changes and power consumption of the screw, and to modify the process from the flow behavior of the products.